Cart 2 india

Specification
Brand : JLP
BulletPoint : JLP machined aluminum bilge fittings are a clean replacement of the bulky plastic fittings usually supplied with aftermarket bilge pump kits. These fittings have a 3/4" inch hose barb flange machined on them so no hose clamp is necessary. Offered in anodized colors. Hose Barb Diameter (OD): 3/4" Inch Thread Length: 1/2" Inch Nut Width: 1-1/4" Inch NOTE: Install with 1" Inch Hole Saw Bit.
BulletPoint1 : Compact mechanical switch offers a combination of reliable solid state electronics and a sealed float switch.
BulletPoint10 : Non-automatic - used with a panel switch or SEAFLO float switch
BulletPoint2 : False start prevention, no mercury, high impact plastic and encapsulated electronics adds up to dependability.
BulletPoint3 : Activates pump at 2" water level, deactivates pump at 3/4" water level.
BulletPoint4 : 12V. Handles up to 15 amps.
BulletPoint5 : Complimentary White Glove Service - Just-Ask-We-Take-Care-of-It
BulletPoint6 : High efficiency, low amp motor, quiet operation
BulletPoint7 : Stainless-steel motor shaft
BulletPoint8 : Anti-Airlock protection
BulletPoint9 : Exclusive moisture tight seals
Color : Silver
ConnectorType : Flange
ExternallyAssignedProductIdentifier : 4121344613643
ExternallyAssignedProductIdentifier1 : 0732535965744
ExternallyAssignedProductIdentifier2 : 732535965744
IncludedComponents : Non Automatic Bilge Pump, Standard Straight Fitting
ItemName : Kawasaki Jetski Jet Ski JS440 JS550 550SX 750SX 800SXR Bilge Water Fitting
ItemPackageDimensions_Height : 2 inches
ItemPackageDimensions_Length : 10 inches
ItemPackageDimensions_Width : 10 inches
ItemPackageQuantity : 1
ItemTypeKeyword : boating-bilge-pumps
Manufacturer : JLP
Material : Plastic
Material1 : Polypropylene (PP)
Material2 : Stainless Steel
MaximumFlowRate : 5 gallons_per_minute
ModelName : SFBP1-G1100-13A
ModelNumber : AMRM-36152
PartNumber : AMRM-36152
PowerSourceType : Ac/dc
ProductDescription : JLP machined aluminum bilge fittings are a clean replacement of the bulky plastic fittings usually supplied with aftermarket bilge pump kits. These fittings have a 3/4" inch hose barb flange machined on them so no hose clamp is necessary. Offered in anodized colors. Hose Barb Diameter (OD): 3/4" Inch Thread Length: 1/2" Inch Nut Width: 1-1/4" Inch NOTE: Install with 1" Inch Hole Saw Bit.
ProductSiteLaunchDate : 2015-02-24T08:00:00.000Z
Style : Bilge Pump
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 40141700
Voltage : 12 volts