Cart 2 india

Specification
Brand : SBU
BulletPoint1 : Black Aluminum Framed Bimini Top Compatible with SeaDoo Model CHALLENGER 180 Year Range 2005-2012
BulletPoint2 : Heavy Duty 3-Bow Frame Has a Mounting Width of: 79-84" and a Height of 36"!
BulletPoint3 : Offers protection from the rain and sun while you’re out on the water! | 2 Tension straps and 2 Support Braces to keep your Bimini still! | Adjustable – Raise and lower the Bimini as you see fit
BulletPoint4 : 600 Denier Dyed Polyester Fabric with 3-bow Aluminum Frames to ensure years of use! | made from Heavy Duty thick wall 7/8in Anodized Aluminum round tubing. | Solution Dyed, Marine Grade Polyester Fabric. Colors are part of fiber itself to resist fading.
BulletPoint5 : Set includes: Top, Frame, Zippered Storage Boot and all necessary mounting hardware. Inflatable Boat mounts are sold separately
Color : Black
Coverage : Good
ExternallyAssignedProductIdentifier1 : 195569258440
ExternallyAssignedProductIdentifier2 : 0195569258440
FabricType : polyester
ItemName : SBU Black Aluminum 3-Bow Bimini Top Compatible for SeaDoo Challenger 180 for Model Years 2005-2012
ItemPackageDimensions_Height : 4 inches
ItemPackageDimensions_Length : 52 inches
ItemPackageDimensions_Width : 13 inches
ItemPackageQuantity : 1
ItemTypeKeyword : bimini-boat-tops
Manufacturer : STOPBYUS
Material : Aluminum
NumberOfItems : 1
PartNumber : SBUBIMINI19158
Pattern : Solid
ProductDescription : Our Black Aluminum Bimini Top is compatible with 2005-2012 CHALLENGER 180 and has a Mounting Width of 79-84".Utilizes 2 Tension Straps and 2 Support Braces to keep the cover still at all times and can be quickly raised and lowered as necessary! The frame is made of Heavy Duty 7/8" thick Aluminum walls, and a Solution Dyed Marine Grade Polyester Fabric to give many years of use! Our arms are Adjustable, allowing our Bimini's to fit a range of boats and provides a significantly easier installation! Our solution dyed material contains both UV and Water-resistant protection, and our coloring is dyed into the fibers rather than the surface to further prevent fading. Our frame can be tilted forward and backward for both better aerodynamics and blocking the sun from specific areas of the boat. This Bimini is rated for speeds up to 30mph and can be protected at faster speeds with additional protective gear such as support bracing and through-bolting (not included). With the use of Thumb Screws, installing and removing this cover is a quick and painless experience! IMPORTANT - if you plan to re-use existing mounts, our top may not fit.
ProductExpirationType : Does Not Expire
ProductSiteLaunchDate : 2021-08-30T20:31:27.225Z
UltravioletLightProtection : UV Protection
UnitCount : 1
UnspscCode : 25170000
WaterResistanceLevel : water_resistant