Cart 2 india

Specification
Brand : Edea
BulletPoint1 : Essential for repositioning blades.
BulletPoint10 : Hand tighten in seconds
BulletPoint2 : Small carbon bars: 2.5 mm in diameter and 12 mm in length.
BulletPoint3 : Useful for plugging the existing holes on the sole of the boot when changing the blade with a different model that requires a different size of screw.
BulletPoint4 : The diameter corresponds to that of the drill tip (mm 2.5) and they are the same thickness as the insole/sole (mm 12)
BulletPoint5 : Sold in packs of 25 bars.
BulletPoint6 : Clear cap provides a "window" to monitor the test media as it drains
BulletPoint7 : Expandable rubber gasket provides air and water tight seal
BulletPoint8 : Durable design; plated steel parts will not rust
BulletPoint9 : No tools, hoses, or gauges are required for installation
Color : Black
Department : unisex
DriveSystem : Others
ExternallyAssignedProductIdentifier1 : 0688961069917
ExternallyAssignedProductIdentifier2 : 688961069917
ExternallyAssignedProductIdentifier3 : 0099385075567
ExternallyAssignedProductIdentifier4 : 0099385075581
ExternallyAssignedProductIdentifier5 : 00026432036301
GpsrSafetyAttestation : 1
ItemDisplayDimensions_Length : 1 inches
ItemDisplayDimensions_Width : 1 inches
ItemDisplayWeight : 1 pounds
ItemName : Edea Carbon Filler Plugs
ItemPackageDimensions_Height : 8.89 centimeters
ItemPackageDimensions_Length : 0.254 centimeters
ItemPackageDimensions_Width : 7.62 centimeters
ItemPackageQuantity : 1
ItemShape : Round
ItemTypeKeyword : hardware-plugs
Manufacturer : EDEA
Material : Rubber
Material1 : PVC
Material2 : Carbon Steel
Material3 : Alloy Steel
MeasurementSystem : Imperial
ModelName : 83656
ModelNumber : PXDC312L275
NumberOfBoxes : 1
NumberOfItems : 1
NumberOfPieces : 375
PartNumber : EDEA-CARBON-FILLER-PLUGS
Pattern : Solid
ProductDescription : Essential for repositioning blades.Small carbon bars: 2.5 mm in diameter and 12 mm in length.Useful for plugging the existing holes on the sole of the boot when changing the blade with a different model that requires a different size of screw. The diameter corresponds to that of the drill tip (mm 2.5) and they are the same thickness as the insole/sole (mm 12).To insert, use a set of pliers to hold the bar in place, and tap it into the hole, applying pressure with a hammer.The consistency of the material allows further drilling next to the bar and on top of it. Sold in packs of 25 bars.
ProductSiteLaunchDate : 2018-05-14T17:21:26.710Z
Size : One Size
Style : All-season
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 49000000