Cart 2 india

Specification
Brand : Korpek.com
BulletPoint : Designed to anchor structural supports to concrete foundations. The bent portion (or leg) of the bolt is that which is embedded into concrete to create greater resistance to forces pulling away from the concrete foundation
BulletPoint1 : This anchor drills its own hole in, and works in any thickness of drywall, without tearing the paper coating. It can easily be backed out of its hole with a #2 screwdriver bit. It's designed for use in lightweight applications, such as curtain hardware, small pictures and lightweight signs. It should not be used for overhead applications. The nylon variety is used when requiring a non-conductive anchor
BulletPoint2 : Metal: Die-cast zinc. Plastic: Injection molded Nylon
BulletPoint3 : Anchors should be 18-24 inches apart from each other (measured from the center of the anchor)
BulletPoint4 : How to Use: Hammer the wall anchors into the wall. Insert the screws into the Anchors. Tighten screws until secure. This way will not leave any holes in the wall after use.
BulletPoint5 : Wide Application: These drywall anchors heavy duty are widely used in gypsum boards, hollow brick, lightweight brick, dry wall. You can also use them to hang picture frames, curtains, clocks, TV, shelves, paintings, etc.
Color : Silver/Gray
ExteriorFinish : Unfinished
ExternallyAssignedProductIdentifier : 4989999993165
ExternallyAssignedProductIdentifier1 : 0736235227232
ExternallyAssignedProductIdentifier2 : 736235227232
IncludedComponents : Product & Instructions Guide
ItemName : 6 Easy Screw in Wallboard Anchor Engineered Nylon (Pack Qty 100) BC-06AWBN by Korpek
ItemPackageDimensions_Height : 2.4 centimeters
ItemPackageDimensions_Length : 11 centimeters
ItemPackageDimensions_Width : 17 centimeters
ItemPackageQuantity : 100
ItemTypeKeyword : bolt-anchors
Manufacturer : Korpek LLC
ManufacturerGrade : Grade 2 3
Material : Nylon
ModelNumber : BC-06AWBN
NumberOfBoxes : 1
NumberOfItems : 100
PartNumber : BC-06AWBN
ProductDescription : PICTURES ARE REPRESENTATIVE OF ITEM, BUT ARE NOT OF THE ACTUAL ITEM. Product dimensions, finish, head markings, thread length, stamping shape or forging shape, etc., may differ from picture. Products are guaranteed to meet the specifications to which they are manufactured. Specifications allow for tolerances in dimension and shape, which can vary from lot to lot. This anchor drills its own hole in, and works in any thickness of drywall, without tearing the paper coating. It can easily be backed out of its hole with a #2 screwdriver bit. It's designed for use in lightweight applications, such as curtain hardware, small pictures and lightweight signs. It should not be used for overhead applications. The nylon variety is used when requiring a non-conductive anchor. Metal: Die-cast zinc. Plastic: Injection molded Nylon. Anchors should be 18-24 inches apart from each other (measured from the center of the anchor). Machine Pack Count - Margin error of +/- 5%
ProductSiteLaunchDate : 2021-02-08T18:56:06.838Z
Size : 6
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SupplierDeclaredDgHzRegulation3 : not_applicable
SupplierDeclaredDgHzRegulation4 : not_applicable
SupplierDeclaredDgHzRegulation5 : not_applicable
UnitCount : 1
UnspscCode : 31161500