Cart 2 india

Specification
Brand : ZIZEV
BulletPoint1 : PULLABLE MATERIAL: This pneumatic riveting is suitable for riveting nuts of various materials such as aluminum, copper, iron, stainless steel, etc.
BulletPoint2 : ERGONOMIC DESIGN: This rivet nut is ergonomically designed, comfortable to grip, easy to operate, lightweight, fatigue after long term use.
BulletPoint3 : WIDE PURPOSE: This pneumatic rivet nut can be used for 5/32in (4.0mm), 3/16in (4.8mm), 1/8in (3.2mm), 3/32in (2.4mm) rivet nuts.
BulletPoint4 : ALLOY STEEL MADE: The main body of the riveting is made of premium alloy steel material, which is sturdy and not easy to break.
BulletPoint5 : HIGH EFFICIENCY: The riveting tool adopts a pneumatic drive design, which is more labor saving, with fast riveting speed, tight riveting, and no machine crash.
ExternallyAssignedProductIdentifier : 7452699348162
ItemName : Rivet Nut Tool, High Efficiency Selfsuction Lightweight Pneumatic Rivet Nut Alloy Steel for Pipes
ItemPackageDimensions_Height : 12 centimeters
ItemPackageDimensions_Length : 27 centimeters
ItemPackageDimensions_Width : 21 centimeters
ItemTypeKeyword : blind-rivets
Manufacturer : ZIZEV
ModelName : ZIZEV2xkgynz1vp
ModelNumber : ZIZEV2xkgynz1vp
NumberOfItems : 1
PartNumber : ZIZEV2xkgynz1vp
ProductDescription : 1. WIDE PURPOSE: This pneumatic rivet nut can be used for 5/32in (4.0mm), 3/16in (4.8mm), 1/8in (3.2mm), 3/32in (2.4mm) rivet nuts.
2. PULLABLE MATERIAL: This pneumatic riveting is suitable for riveting nuts of various materials such as aluminum, copper, iron, stainless steel, etc.
3. HIGH EFFICIENCY: The riveting tool adopts a pneumatic drive design, which is more labor saving, with fast riveting speed, tight riveting, and no machine crash.
4. ERGONOMIC DESIGN: This rivet nut is ergonomically designed, comfortable to grip, easy to operate, lightweight, fatigue after long term use.
5. ALLOY STEEL MADE: The main body of the riveting is made of premium alloy steel material, which is sturdy and not easy to break.

Specification:
Item Type: Pneumatic Rivet Nut
Material: Alloy steel
Working Air Pressure: 6.3-8kgf/cm²
Tensile Force: 135kgf (1.323kN)
Inlet Port: 1/4in
Pullable Core Rivet Specification: Approx. 4mm / 5/32in, 4.8mm / 3/16in, 3.2mm / 1/8in, 2.4mm / 3/32in
Pullable Core Rivet Material: Aluminum, aluminum alloy, steel, iron, stainless steel
How to Use:
1. Working air pressure: 6.3‑8kgf/cm².
2. Hydraulic oil grade 46#.
3. Before use, observe from the tail end of the rivet to ensure that the claw group is open and in a circular hole state, and that there are no foreign objects obstructing the rivet nut withdrawing channel before normal use.
4. The rear guide tube should be completely screwed into the oil piston rod, and then locked by reverse rotation with a locking nut. The front and rear guide tubes are also threaded and should be fully screwed in. If the brake ring clamp cannot align with the front and rear guide tubes at the same time, the front guide tube can be slightly rotated in the opposite direction to match the brake ring clamp. Attention: The front guide tube should not be loosened in the opposite direction by more than one circle.
5. It is recommended to clean the claw, front and
ProductSiteLaunchDate : 2024-01-05T16:15:48.234Z
UnspscCode : 31161700