Cart 2 india

Specification
Brand : Stick It Anchor Pins
BulletPoint1 : ZINC-PLATED ASPHALT ANCHORS: Stop wasting time pouring concrete! BoltHold's industrial in-ground anchors allow you to install anything on asphalt in three simple steps, offering a fast, cost-effective, and reliable solution to asphalt mounting. Measuring 12" long, these SP18-716 Zinc-Plated Steel Anchors incorporate a 7/16"-14 UNC (coarse) female thread and are pre-installed with a 1.25" long bolt and a 1" diameter washer. Set includes 6 anchors.
BulletPoint2 : MEDIUM-TO-HEAVY LOAD: Pull rated for 2,500 lb! Designed for a medium-to-heavy load, BoltHold SP18-716 chemical anchors resist at least 2,500 pounds pull and 2,000 pounds of high shear force at ground level. Rated for 280 in-lb rotary torque, the anchor's welded spiral offers a strong bond with the grout, while the washer at the top prevents the anchor from dropping below the surface or being pulled up into the mounting plate when tightening the bolt.
BulletPoint3 : LONG TERM STABILITY: Creates a stress-free bond that lasts! Due to asphalt's weaker nature, typical expansion-type wedge anchors used in concrete won't hold to the pressure. BoltHold anchors solve this problem by embedding deep into the compacted gravel below the asphalt layer to increase the shear resistance and ensure long-lasting stability—perfect for safely installing carports, sheds, bike racks, signage, lights, parking barriers, and many more asphalt mounting applications.
BulletPoint4 : EASY TO INSTALL: BoltHold makes asphalt anchoring a breeze! For quick installation, drill a hole deep into the asphalt and the gravel below it and fill with EPX2 or EXP3 Anchoring Grout (sold separately). Push in the anchor until it is flush with the asphalt surface and allow grout to harden. Anchors are ready for use in 15 minutes. Full strength may take one hour.
BulletPoint5 : ASPHALT ANCHORS CORP: We pride ourselves on offering reliable and effective solutions for asphalt mounting. Our heavy-duty BoldHold anchoring products are manufactured with high-grade materials and tested to provide you with long-lasting durability you can trust.
Color : Silver
CompatibleGrooveDiameter : 0.875 inches
CustomerPackageType : 1
DriveSystem : Phillips
ExteriorFinish : Zinc
ExternallyAssignedProductIdentifier : 00849672023340
ExternallyAssignedProductIdentifier1 : 0655368023194
ExternallyAssignedProductIdentifier2 : 655368023194
FinishType : Zinc
GpsrSafetyAttestation : 1
IncludedComponents : OZCO I2-600 2x2 Square Post Anchor (24")
ItemName : Stick It Anchor Pins for Shallow Water- 8' Black Anchor Pin Only
ItemPackageDimensions_Height : 35.7886 centimeters
ItemPackageDimensions_Length : 6.604 centimeters
ItemPackageDimensions_Width : 11.9126 centimeters
ItemPackageQuantity : 1
ItemShape : Cylindrical
ItemTypeKeyword : bolt-anchors
Manufacturer : Quad Fab Inc
ManufacturerGrade : Stainless Steel
Material : Plastic
MaximumShearStrength : 2000 lbs.
MeasurementSystem : Imperial
MetalType : Zinc
ModelName : OZCO I2-600 2x2 Square Post Anchor (24")
ModelNumber : BoltHold Asphalt Anchors
NumberOfBoxes : 1
NumberOfItems : 1
NumberOfPieces : 6
PackageLevel : unit
PartNumber : 52366_B
Pattern : Solid
ProductDescription : 8' Stick It Anchor Pin for shallow water - anchor pin ONLY. Includes: 1 x black 8' x 3/4" solid reinforced polyester resin anchor pin with a T handle. No metal, no maintenance.
ProductSiteLaunchDate : 2021-01-26T09:13:24.509Z
SafetyWarning : Caution: Handle with care. The sharp pointed end can cause injury during insertion and removal. Always wear appropriate protective gear. Avoid contact with underground utilities to prevent damage. Ensure proper anchoring techniques to prevent dislodging and potential harm.
Size : One Size
Style : SP18 - Zinc Plated
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 10
UnspscCode : 30241511