Cart 2 india

Specification
BatteriesIncluded : 1
Brand : Handgun
BulletPoint1 : Quickly remove and Install stock reat sights
BulletPoint2 : 4 17,18,19,26,34,43,22,23,35,24, 20,40, 21,30, 41, 31,32,42 plus more
BulletPoint3 : Quickly adjust tool for different size slides
BulletPoint4 : Easy carry in range bag
BulletPoint5 : Affordable alternative to metal sight tool
Color : Black
Department : unisex-adult
ExternallyAssignedProductIdentifier : 7432135160114
ExternallyAssignedProductIdentifier1 : 0606413577841
ExternallyAssignedProductIdentifier2 : 606413577841
ExternallyAssignedProductIdentifier3 : 00669256223047
ImportDesignation : Made in USA
IncludedComponents : see descritption
ItemDisplayDimensions_Length : 20 centimeters
ItemDisplayDimensions_Width : 2 centimeters
ItemDisplayWeight : 5 ounces
ItemName : HandgunRear Sight Install and Removal Tool Upgraded
ItemPackageDimensions_Height : 2 inches
ItemPackageDimensions_Length : 8 inches
ItemPackageDimensions_Width : 4 inches
ItemPackageQuantity : 1
ItemShape : rectangle
ItemTypeKeyword : hunting-boresighters
Manufacturer : 3Dprinting4Unow
Material : Plastic
ModelName : 1006781
ModelNumber : 1006781
MountingType : Dovetail Mount
NumberOfItems : 1
PartNumber : 1006781
ProductDescription : UPGRADED Night sights are fragile and must be handled carefully.This tool is designed to push out the old sights and push the new ones into place. It also works good at the range for adjusting the sights side to side.To compensate for sloppy tolerances in the dovetail cuts most manufacturers machine their sights a little large and you will need to fit the sights by filing or stoning. 1. Look at the sight and see if you need the angled side or the straight side of the pusher block. Make sure the gun is unloaded. 2. Remove slide from pistol. 3. Clean gun 4. Use oil or gun grease on the threads of the tool and oil the sight so it moves easily. 5. Install the slide and shim as needed with spacers or washers so you`re lined up to push at the bottom of the sight 6. Put slide into tool. Use the included spacers to adjust for proper fit for your specific handgun. You can use them anyway you wish to make it fit correctly. Place side spacer TOWARDS handle as in pictures. 7. Check that you have it lined up right. You might want to put a something to protect your gun in-between he gun and tool. 8. Slowly turn the bolt head and keep checking as the sight moves into alignment. (20 pounds of torque on a 6" long wrench is over 2,000 lbs of pressure pushing on the sight.) 9. DO NOT force it " STOP " and soak the slide and sight in gun oil over night and then try again to get it apart. Some stock sights so tightly fitted that you should consider taking it to a gunsmith for proper fit We accept no responsibility for the use OR misuse of this device. Any damage to the item or the firearm are the sole responsibility of the buyer. Again, please do not force your new sight on. If it is very tight it will need to be oiled. Tool for most Glock pistols
ProductSiteLaunchDate : 2016-06-22T07:00:00.000Z
SportType : Hunting
Style : boresighter
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 49000000