Cart 2 india

Specification
Brand : Micro 100
BulletPoint1 : Designed to generate square grooves around a boss in the face of a part for right hand grooving
BulletPoint2 : Significantly reduces cycle times, as right hand design allows for multiple tools to be run simultaneously
BulletPoint3 : Relief ground along Maximum Turn Depth (L2) to avoid interference during long turning applications
BulletPoint4 : Polished split face for improved edge retention and chip evacuation while reducing galling
BulletPoint5 : Split face geometry provides optimal edge strength
Color : Silver
CompatibleMaterial : Alloy Steel
CompatibleMaterial1 : Plastic
CompatibleMaterial2 : Stainless Steel
CompatibleMaterial3 : Metal
CompatibleMaterial4 : Wood
CompatibleMaterial5 : Alloy Steel
ExternallyAssignedProductIdentifier : 8475896792025
FinishType : Finished
ItemName : Micro 100 FGI-5774 Face Grooving Tool, 030" Width, 060" Proj, 3025" Min Bore Dia, 3/4" Max Bore Depth, 1463" Offset, 5/16" Shank Dia, 2-1/2" OAL, Uncoated
ItemPackageDimensions_Height : 0.51 inches
ItemPackageDimensions_Length : 2.5 inches
ItemPackageDimensions_Width : 0.51 inches
ItemPackageQuantity : 1
ItemTypeKeyword : boring-bars
Manufacturer : Micro 100 Tool Corporation
Material : Solid Carbide
NumberOfItems : 1
PartNumber : FGI-5774
ProductDescription :

Features:

1.  Sharp and durable carbide tip can be reused after grinding.

2.  The hole diameter can be adjusted by the distance from the drill bit tip to the center.

3.  Alloy steel with heat treatment can be used for thin-film plate.

4.  Can be installed and operated on the electric drill and bench drill.

5.  Widely used in wooden board, plastic board, gypsum board, etc.

 

Specifications:

Material: alloy steel

Color: silver

Shape: airplane

Hole diameter range: 30-300mm / 1.18-11.81in

Weight: Approx. 518g

 

Package Includes:

1 x Adjustable Hole Saw Drill Bit Set

 

Note:

1. Before starting operation, check if all the screws are tightened.

2. Be sure to hold it during operation to prevent accidents.

3. When replacing the drill, it is necessary to cut off the power.

4. Cuttings generated during drilling should be cleaned by special tools rather than hand.

ProductSiteLaunchDate : 2023-06-27T19:37:30.894Z
Size : 4-5/16"(110mm)
Style : Adjustable
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SupplierDeclaredDgHzRegulation3 : not_applicable
SupplierDeclaredDgHzRegulation4 : not_applicable
SupplierDeclaredDgHzRegulation5 : not_applicable
SurfaceRecommendation : Stainless Steel,Steel
UnitCount : 1