Cart 2 india

Specification
Brand : Micro 100
BulletPoint : 5' 7" (5 feet 7 inch) Long; 0.025" Thickness
BulletPoint1 : Designed for plunging thread relief at the bottom of a thread
BulletPoint2 : Polished split face for improved edge retention and chip evacuation while reducing galling
BulletPoint3 : Split geometry makes the tool as rigid as possible
BulletPoint4 : Coolant fed enabled shank design
BulletPoint5 : Proprietary Micro-Quik quick change system maximizes productivity through reliable accuracy and locational repeatability
Color : Green
CompatibleMaterial1 : Plastic
CompatibleMaterial2 : Metal
CompatibleMaterial3 : Aluminum
CompatibleMaterial4 : Copper
CompatibleMaterial5 : Brass
ExternallyAssignedProductIdentifier1 : 0764968901198
ExternallyAssignedProductIdentifier2 : 764968901198
FinishType : AlTiN Coated
GpsrSafetyAttestation : 1
IncludedComponents : HIKOKI 751325 Latonado Disco 100 - 6 mm Cilíndrico Grosor Alambre de 0.3 mm
ItemDisplayDimensions_Length : 9 inches
ItemDisplayWeight : 0.35 pounds
ItemName : Micro 100 QLTR-094-4X Thread Relief Tool - Quick Change, .104" Min Bore Dia, 1/4" Max Bore Depth, .040" Proj, 3/16" Shank Dia, 1-1/2" OAL, AlTiN
ItemPackageDimensions_Height : 0.32 inches
ItemPackageDimensions_Length : 1.5 inches
ItemPackageDimensions_Width : 0.32 inches
ItemPackageQuantity : 1
ItemTypeKeyword : boring-bars
Manufacturer : Micro 100 Tool Corporation
Material : Solid Carbide
ModelName : 751325
ModelNumber : 751325
NumberOfItems : 1
NumberOfPieces : 1
NumberOfTeeth : 14
PackageLevel : unit
PartNumber : QLTR-094-4X
ProductDescription : Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel ), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material. All bandsaw blades carried by Magnate (TM) are welded and fabricated in the USA. The coils/material are USA brands but may not be made in the USA. All band saw blades’ pictures depict a general bandsaw blade and thus may look different from each particular item. If the teeth of the bandsaw blade are pointing in the opposite direction of your machine, flip the blade inside out. Warning: For packaging purposes, this blade is folded into a coiled position similar to a spring and may pop open during coiling or uncoiling. Wear heavy-duty leather gloves and eye/body protection, and exercise extreme caution when handling the blade. Failure to do so could result in serious bodily injury. Refer to your bandsaw owner's manual for further safety instructions.
ProductSiteLaunchDate : 2025-05-13T18:13:19.769Z
Style : Compact
SupplierDeclaredDgHzRegulation : unknown
UnitCount : 1
UnspscCode : 27111700