Cart 2 india

Specification
Brand : LGXEnzhuo
BulletPoint1 : PARAMETERS-The maximum processing hole diameter: Ф260mm(10.24inch); The minimum processing hole diameter: Ф55mm(2.17inch); Boring bar: 50*1500MM(1.97*59.06inch); The maximum processing travel: 380mm; The maximum feed depth: 2mm on one side (A3 steel); Surface roughness: Ra3.2; Deviation from circular form≤0.02mm; Rotate speed: 0-83RPM
BulletPoint2 : 4.9FT BORING BAR-The boring bar is made of high-strength alloy and structural steel, which has the characteristics of high hardness, high precision, high toughness and good wear resistance. The boring bar can be disassembled separately for convenient installation.
BulletPoint3 : MOTOR AND HANDLE CONTROLLER-The whole machine adopts 110V constant current motor with low speed and large torque, which can realize stable processing and superior performance. The motor controller is equipped with a dynamic delay braking program to avoid vibration during shutdown. After the machine is installed, the controller can be removed to control the machine and perform the drilling operation. The control cabinet is installed under the host, which is conducive to safe operation.
BulletPoint4 : STEPLESS SPEED REGULATION-Stepless speed regulation can be realized for feed processing. The feeding process can be set as required, and it will stop automatically after reaching the limit switch.
BulletPoint5 : APPLICATION-The drilling machine is a portable processing equipment developed for on-site service of construction machinery. It is mainly used for processing inner holes of small tubes and concentric cross holes. Widely used in excavators, cranes, loaders, cranes and other construction machinery.
BulletPoint6 : Freud's Limited Lifetime Guarantee
Color : Yellow
CompatibleMaterial : Metal
ConnectorType : Cap
CutType : Chamfer Cut
DrillType : basic_drill
ExternallyAssignedProductIdentifier1 : 0785869956513
ExternallyAssignedProductIdentifier2 : 785869956513
ExternallyAssignedProductIdentifier3 : 00738685237557
FinishType : Uncoated
GpsrSafetyAttestation : 1
IncludedComponents : 1 Amana Branded Tool
IsElectric : 1
ItemDisplayDimensions_Height : 9 inches
ItemDisplayDimensions_Length : 1 inches
ItemDisplayDimensions_Width : 3 inches
ItemName : LGXEnzhuo Line Portable Boring Machine 110V XDT50 55-260MM Capacity Engineering Mechanical Hole Drilling Tool with 4.9ft Boring Bar and Accessories
ItemPackageDimensions_Height : 58 centimeters
ItemPackageDimensions_Length : 75 centimeters
ItemPackageDimensions_Width : 45 centimeters
ItemPackageQuantity : 2
ItemShape : Rectangular
ItemTypeKeyword : boring-bits
Manufacturer : LGXEnzhuo
Material : Alloy Steel
Material1 : Blend
Material2 : Blend
Material3 : Blend
Material4 : Blend
Material5 : Blend
MaximumPower : 1815 watts
MaximumRotationalSpeed : 83 rpm
ModelNumber : XDT50
NumberOfFlutes : 2
NumberOfItems : 1
NumberOfPieces : 6
NumberOfSpeeds : 1
PackageLevel : unit
PartNumber : E022160
Pattern : Solid
PowerSourceType : AC
ProductDescription :

The line boring machine is installed by welding and bolt connection, which is convenient for disassembly and transportation.

It is suitable for the processing of various concentric holes and parallel holes. Continuous cutting, with high production efficiency and high machining accuracy.

Mainly used for post-weld processing of shaft pin holes, rotary holes and hinge holes of various construction machinery structures, or inserts after reaming; repair and processing of concentric holes such as excavators, loaders, and cranes.

ATTENTIONS:

Machine is installed by fixed clamp and uses different tool rest according to different dia ranges. Please confirm the diameter of processing hole before use to select the appropriate tool rest.

Slushing oil should be painted to boring bar and feed screw which are not used very often.

Appropriate grease oil should be added to the feed box every half a year.

Spindle box and feed box should be stored by sealing if these parts are not used for a long time.

Appropriate grease oil should be added to guide post and screw before processing.

Specifications:

Type: XDT50 Portable Line Boring Machine

Max. process hole diameter: Ф10.23 inch/ 260 mm

Min. process hole diameter: Ф2.16 inch/ 55 mm

Max. process travel: 14.96 inch/ 380 mm

Maximum feed depth: 2mm on one side (A3 steel)

Surface roughness: Ra3.2

Deviation from circular form≤0.02mm

Rotate speed: 0-83RPM

Boring bar: 1.96" x 59"/50 x 1500mm

Control Type: Handle Control Box

Package Contents: ENT022808

1 x Line Boring Machine XDT50

1 x 59" Boring bar

1 x Necessary accessories

ProductSiteLaunchDate : 2022-06-24T06:09:29.619Z
Size : 55-260MM
Speed : 83 rpm
Style : Portable,Circular
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
SurfaceRecommendation : Wood
SurfaceRecommendation1 : Polyvinyl Chloride
SurfaceRecommendation2 : Wood
UnitCount : 1
UnspscCode : 27111500
Voltage : 110 volts_of_alternating_current