Cart 2 india

Specification
Brand : MAGNATE
BulletPoint : 57mm Overall Length, Carbide Tipped ; 15mm Cutting Diameter; Left Hand Rotation; 57mm Overall Length
BulletPoint1 : 57mm Overall Length, Carbide Tipped Dowel ; 9mm Cutting Diameter; Right Hand Rotation
BulletPoint2 : 57mm Overall Length
BulletPoint3 : Drill and chisel set for use with SDS Plus hammer drills.
Color : Green
CuttingAngleString : 90 degrees
ExternallyAssignedProductIdentifier : 20024721879121
ExternallyAssignedProductIdentifier1 : 0637881813391
ExternallyAssignedProductIdentifier2 : 637881813391
FinishType : Polished
ItemDisplayDimensions_Length : 110 millimeters
ItemName : Magnate 1339 Brad Point Boring Bit, 10mm Shank - 9mm Cutting Diameter; Right Hand Rotation
ItemPackageDimensions_Height : 17.2 centimeters
ItemPackageDimensions_Length : 1 centimeters
ItemPackageDimensions_Width : 1.6 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : boring-bits
Manufacturer : Magnate
Material : Carbide
ModelNumber : 631824000
NumberOfItems : 1
NumberOfPieces : 1
PackageLevel : unit
PartNumber : 1339
ProductDescription : Good for creating recesses for hinges when using a hinge template guide and also good for cleaning out rough dado cuts. For laminates, plastics, pressed boards and solid woods. These bits create clean entry holes with smooth interiors. This carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity. Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. It is precision ground, hardened, and tempered in order to stand up to a variety of materials. It is also equipped with wide open gullets for easy disposal of wood chips. It is suited for softwoods, hardwoods, chipboard, plywood and etc. Note : In order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. Excessive overall length may cause tool damage. In case a bit doesn't come with a speed chart. You may try the following suggestion. This is merely a guideline to start, result likely varies due to the varieties of edge and material hardness: Run 24,000 rpm maximum for 1" overall diameter router bits; Run 18,000 rpm maximum for 1-1/4" overall diameter router bits; Run 16,000 rpm maximum for 2-1/4" to 2-1/2" overall diameter router bits; Run 12,000 rpm maximum for 3" to 3-1/2" overall diameter router bits;
ProductSiteLaunchDate : 2007-06-28T05:40:07.000-00:00
Size : 6 x 110 mm
StreetDate : 2016-04-21T00:00:01Z
SurfaceRecommendation : Metal
UnitCount : 1
UnspscCode : 27111701