Cart 2 india

Specification
AutomotiveFitType : vehicle_specific_fit
Brand : PATIKIL
BulletPoint1 : Specification: Color: White, Silver Tone; Material: Aluminium Foil and Paper back; Diameter: 28mm / 1.1 inch; Suitable for bottle outer diameter neck size: slightly less than 28mm / 1.1 inch.; Thickness:0.5 mm / 0.02 inch; Packing List: 200 Pcs x Aluminum Bottle Cap Liners
BulletPoint2 : Advantage: The cap seal liner is composed of aluminum foil and cardboard elastomer, which can effectively avoid water, dust, moisture dirt, and odors into the jar and prevent the bottle from leaking so that it can keep the products fresh at all times; The aluminum foil sealing liner gives your products a professional look while providing a tamper-proof seal, which allows your customers to use your products with confidence.
BulletPoint3 : Instruction: Clean the bottle top thoroughly with a clean cloth to ensure there are no liquid, solid or oily residues; Place the aluminum foil side of the seal into the bottle cap(the Silver aluminum foil side of the seal should face down, and the white side should face up.); Tighten the bottle mouth and seal it with the induction heat sealer; After the sealing process is over, the entire foil lining will completely fall off the cap and remain attached to the jar opening.
BulletPoint4 : Application: The aluminum foil liners are suitable for containers of PE/HDPE plastic material bottles, jars or cans. It is widely used for sealing seasoning, detergent, toiletries, hair care supplies, and other powders, solids, liquids, and oils.
BulletPoint5 : NOTE: Make sure the aluminum foil liner size matches the jar opening; Only work for PE/HDPE Plastic jars, not for Glass and PET jars( Plastic cap is mandatory); Avoid overfilling the container; The induction heat sealer is not included
CareInstructions : Hand Wash
Color : White
CustomerPackageType : Standard Packaging
ExternallyAssignedProductIdentifier1 : 0723645692309
ExternallyAssignedProductIdentifier2 : 723645692309
GpsrSafetyAttestation : 1
IncludedComponents : 2 Shoudle Straps
ItemDisplayDimensions_Height : 2 centimeters
ItemDisplayDimensions_Length : 0.94 inches
ItemDisplayDimensions_Width : 2 inches
ItemDisplayWeight : 2 ounces
ItemName : PATIKIL 28mm/1.1" Aluminum Foil Cap Liner, 200 Pack Resistant Tamper Induction Heat Sealer Sealing Liners for PE/HDPE Plastic Bottle Jar Lid
ItemPackageDimensions_Height : 15.2 centimeters
ItemPackageDimensions_Length : 1.9 centimeters
ItemPackageDimensions_Width : 15.1 centimeters
ItemPackageQuantity : 1
ItemShape : Round
ItemTypeKeyword : beer-bottling-equipment
Manufacturer : PATIKIL
Material : Aluminum Foil, Paper Back
Material1 : polyester cotton
Material2 : Plastic
Material3 : rubber
ModelName : 6gallon
ModelNumber : ST20240008G
NumberOfBoxes : 1
NumberOfItems : 1
NumberOfPieces : 200
PackageLevel : unit
PartNumber : ptf240611tt000064
ProductDescription : The aluminum foil liners are suitable for containers of PE/HDPE plastic material bottles, jars, or cans. It is widely used for sealing bottles of seasoning, detergent, toiletries, hair care supplies, and other powders, solids, liquids, and oils.

Specification
Color: White, Silver Tone
Material: Aluminium Foil and Paperbacking
Diameter: 28mm / 1.1 inch
Suitable for bottle outer diameter neck size: slightly less than 28mm / 1.1 inch.
Thickness:0.5 mm / 0.02 inch
Packing List: 200 Pcs x Aluminum Bottle Cap Liners

Advantage
1. The cap seal liner is composed of aluminum foil and paperbacking, which can effectively avoid water, dust, moisture dirt and odors into the jar and prevent the bottle from leaking so that it can keep the products fresh at all times.
2. The aluminum foil sealing liner gives your products a professional look while providing a tamper-proof seal, which allows your customers to use your products with confidence.

Instruction
1. Clean the bottle top thoroughly with a clean cloth to ensure there are no liquid, solid or oily residues;
2. Place the aluminum foil side of the seal into the bottle cap(the Silver aluminum foil side of the seal should face down, and the white side should face up.)
3. Tighten the bottle mouth and seal it with the induction heat sealer.
4. After the sealing process is over, the entire foil lining will completely fall off the cap and remain attached to the jar opening.

NOTE
1. Make sure the aluminum foil liner size matches the jar opening.
2. Only work for PE/HDPE Plastic jars, Not Work for Glass and PET jars( Plastic cap is mandatory)
3. Avoid overfilling the container.
4. The induction heat sealer is not included.
ProductSiteLaunchDate : 2024-07-16T10:31:48.748Z
Size : 28mm/1.1"
Style : Compact
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 52152000
Voltage : 1 volts
WarrantyDescription : manufacturer warranty for 90 day