Cart 2 india

Specification
Brand : Hobby Homebrew
BulletPoint1 : Unique SWAK "Sealed With A Kiss" Design.
BulletPoint2 : These quality PVC heat shrink capsules are made for sealing bottle necks with style! They are commonly used to provide wine bottles a professional look and ensure integrity.
BulletPoint3 : Easy to use - These capsules can be shrunk to fit your bottle necks in a matter of seconds. A professional heat shrink machine is not necessary. Heat gun on low, Hair dryer on high or boiling water dip (See safety note below, wear eye protection and gloves).
BulletPoint4 : Gives your product a unique and professional appearance.
BulletPoint5 : Dimensions: 30x60mm to fit standard cork or screw top finish wine bottle.
Color : Multicolor
ExternallyAssignedProductIdentifier1 : 0733960924924
ExternallyAssignedProductIdentifier2 : 733960924924
ItemName : 100 Pack PINK KISS SWAK"Sealed with a Kiss" SHRINK CAPSULES 30 PVC Caps for Wine Bottles
ItemPackageDimensions_Height : 36.1 centimeters
ItemPackageDimensions_Length : 32.5 centimeters
ItemPackageDimensions_Width : 36.1 centimeters
ItemPackageQuantity : 1
ItemShape : Cyclindrical
ItemTypeKeyword : wine-bottling-equipment
Manufacturer : Home Brew Ohio
Material : Cork
MetalType : other
ModelNumber : HOZQ8-971
NumberOfItems : 1
PartNumber : HOZQ8-971
ProductDescription : These are first quality capsules identical to the ones used in commercial wineries in Napa Valley.  In fact they are the shrink capsules used in Napa Valley.  They will shrink to fit all standard 375ml, 750ml, & 1500ml wine bottles with standard lip. 

These are a standard size 30x60mm size like commercial winemakers use on their automated equipment for normal wine bottles.  Larger, thicker, and better quality than most capsules usually sold for home winemaking or the Russian and Chinese ones that rip or tear, crack, or blister open immediatly or in a few weeks.  These capsules will fit all standard lip cork or screw top finish wine bottles.  They do not fit bottles with a larger 'fat' lip around the mouth.

All you do is slip the capsule on and heat.  You can read on the web how to hold the bottle in a gloved hand, and hold the capsule in place with a long fork or bent wire while you dip it briefly and carefully for up to 10 seconds into hot water.  The capsule will shrink closely to the form of the bottle and look just like the ones from the winery.  You can also use a heat gun on low or a hair dryer on high. Keep rotating the bottle for even shrink. SAFETY NOTE: Wear eye protection and the hand that holds the bottle should be gloved so that the hot air draft does not burn the hand. If using the boiling water dip method some may drip when pulling the bottle from the water. Wear a glove on the bottle hand and eye protection.
ProductSiteLaunchDate : 2021-02-07T16:10:00.336Z
Size : 6×3×3CM
StreetDate : 2017-08-11T00:00:01Z
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 24122000