Cart 2 india

Specification
Brand : Jetec
BulletPoint1 : Package contents: the package includes 4 pieces of separate brackets and 4 pieces of pin bolts, a total of 8 pieces of parts; They can meet your daily use and replacement, suitable for blind installation
BulletPoint2 : Durable material: these metal hold down brackets are made of reliable metal materials, strong, durable and lightweight, easy to install and less likely to deform or break; They are suitable for most blinds or windows and can serve you for a long time
BulletPoint3 : Appropriate size: the size of each metal hold down bracket is about 2 inches, which is suitable for most blinds and does not take up too much space; Before ordering, please check the size carefully and make sure they can match your windows or blinds
BulletPoint4 : Simple design: blind hold down brackets are simple in design, small in size, thus, they are difficult to be noticed; Using them to hold down most blinds will not affect the overall appearance of the blinds, and you can enjoy the beautiful scenery from the windows as well
BulletPoint5 : Easy to apply: the installation and application of these tools are rather easy and convenient; Firstly, you put the pins into the holes of the brackets, and then reinforce them and you can successfully apply them; For more details, please refer to the installation steps below
CareInstructions : Spot Clean
Color : Silver
ControlType : cordless operation
DriveSystem : Others
ExternallyAssignedProductIdentifier1 : 707392736677
ExternallyAssignedProductIdentifier2 : 0707392736677
ExternallyAssignedProductIdentifier3 : 00707392736677
FinishType : Unfinished
GpsrSafetyAttestation : 1
IncludedComponents : 20 PCS E-Track Wood Beam End Socket
ItemName : 2 Inch Metal Hold Down Brackets and Pins, Blind Brackets Blind Holder Replacements for Horizontal Blinds Shades Windows Doors (8)
ItemPackageDimensions_Height : 11.8 centimeters
ItemPackageDimensions_Length : 2.6 centimeters
ItemPackageDimensions_Width : 7.8 centimeters
ItemPackageQuantity : 8
ItemShape : Square" or "Rectangular
ItemTypeKeyword : hardware-brackets
Manufacturer : Jetec
Material : Metal
Material1 : Plastic
Material2 : Wood
MeasurementSystem : Imperial
MetalType : Carbon Steel
ModelName : Simpson Strong-Tie
ModelNumber : JETEC-001
MountingType : Door Mount
NumberOfItems : 8
NumberOfPieces : 75
Opacity : Blackout adult_us
OperationMode : Manual
PackageLevel : unit
PartNumber : TRX20CS
PatternType : Solid
ProductDescription :
4 Pieces 2 inch metal hold down brackets and 4 pieces pins, blind brackets blind holder replacements for horizontal blinds shades windows doors

Proper ans simple appearance:
These metal hold down brackets are simple in design, small in size, thus, they are difficult to be noticed. Using them to hold down most blinds will not affect the overall appearance of the blinds, and you can enjoy the beautiful scenery from the windows as well.




Installation procedures:
1 What you need: drill, screwdriver, tape measure, hammer, pencil.
2 If the bottom rail is not fitted with pins, drill a approx. 1/2 inch deep 7/64 inch or 3/32 inch bit in the center to hold pins on both sides of the rail.
3 Punch the pins in.
4 Put the blind plate down, put the bottom rail flat in place, and mark the position of the fixed bracket with a pencil.
5 Screw the bracket to the door.
6 Measure the position of the bracket now screwed to the door and mark on the other side.
7 Then repeat the above steps to install the second bracket.

Specification:
Material: metal

Package includes:
4 x Hold down brackets
4 x Pin bolts

Warm notice:
Slight size errors may exist due to manual measurement.
To avoid choking hazard, please keep the products away from kids under the age of 3.
ProductSiteLaunchDate : 2020-10-30T03:36:12.404Z
RecommendedUsesForProduct : 戶外
RoomType : Living Room
Size : 2 Inch
SpecificUsesForProduct : 家居装饰
StreetDate : 2017-06-27T00:00:01Z
Style : Thread: M6
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 75
UnspscCode : 31162500
WaterResistanceLevel : not_water_resistant