Cart 2 india

Specification
Brand : AUZHU
BulletPoint1 : STH is the model number for this product. The dimensions you have chosen are: the inner diameter D of the shaft hole of the bracket is 12 mm; the inner diameter K of the other shaft hole is 12 mm. Different capital letters are used in the product drawings to represent the dimensions of the various detail positions on the product. The specific dimensional data can be found under the corresponding letters in the specification sheet, and several sizes are available.
BulletPoint2 : [Material of main body: Aluminium Alloy]; [Finish of main body: Black Anodize]; [Material of fastening bolts: Carbon Steel]; [Finish of bolts: Black Oxide].
BulletPoint3 : This bracket supports and secures shafts or pipes, etc., and can also withstand certain loads. The shaft hole of the bracket can be adjusted for locking effect by turning the bolt. When locking shafts or pipes with uneven surfaces, the clearance between the shaft and the bracket can be controlled by twisting the bolt, making it easy to lock the shaft or dismantle it on the spot during use, so that it can be applied to a wider range of use scenarios and enhance use efficiency.
BulletPoint4 : This bracket accessory includes two locking bolts that lock the bracket's shaft holes. The bolts are hexagon socket head cap screws that can be turned with a hexagonal spanner to control the locking of the shaft holes. This bracket is usually used for connecting 2 straight cross-crossing pillars, and can flexibly assist the positioning and installation of pillars by adjusting the height, width and angle.
BulletPoint5 : Warm reminder: the data on this page are in metric millimetres. As the sizes are measured manually, there may be a slight error, but the error will be less than ±0.5 mm, please understand.
Color : Ferrous
DriveSystem : Torx
ExteriorFinish : Epoxy
ExternallyAssignedProductIdentifier1 : 746056682806
ExternallyAssignedProductIdentifier2 : 0746056682806
ExternallyAssignedProductIdentifier3 : 00746056682806
FinishType : Glossy
IncludedComponents : Bolts
ItemLength : 5.31 inches
ItemName : AUZHU- STH - Metric - Aluminium alloy Bracket Guide shaft supports Two-Way connector clamps Double-Hole strut clamps Tube clamp connectors Clamp mountings Column clamp Fixture Size: D12 mm - K12 mm
ItemPackageDimensions_Height : 21.9964 centimeters
ItemPackageDimensions_Length : 10.0076 centimeters
ItemPackageDimensions_Width : 17.7038 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : hardware-brackets
Manufacturer : AUZHU
Material : STH - Aluminium Alloy
MeasurementSystem : Imperial
MetalType : Alloy Steel
ModelName : STH-D12 mm-K12 mm
ModelNumber : STH-D12-K12
MountingType : Corner Mount
NumberOfItems : 1
NumberOfPieces : 12
PartNumber : STH-D12 mm-K12 mm
ProductDescription : About this product:
* The wide range of brackets and clamps, which can be used for both square and round tubes, is ideal for building modular structures and a variety of industrial applications. These open-ended guide shaft supports can also be repeatedly locked or dismantled without damaging the shaft, thus adapting them to a wide range of use scenarios.
* Scope of application: This bracket is made of aluminium alloy, which is cost-effective, airtight, corrosion-resistant, easy to machine or cut, and lightweight. It can be widely used in standard parts of precision equipment such as factory automation, MRO, manufacturing and processing, electronic and electrical equipment, ships, military aviation, decorative hardware, industrial manufacturing, plastic molds, etc.
* We are a factory, if you need more special hardware parts, we can provide customized processing services. We can customize the style and size you need according to the customer's drawings or requirements, and welcome your letters.

ProductSiteLaunchDate : 2021-09-01T03:28:58.237Z
Size : Shaft bore diameter: D12 mm; K12 mm
Style : Clamp
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 2