Cart 2 india

Specification
Brand : povtii
BulletPoint : automotive glass repair tools
BulletPoint1 : 【Compatible Vehicle Models】: This brake caliper piston rewind tool can be compatible with most vehicle models, containing 80, 90, V8s, XJ40, 323, 326, Galant GLSi, 9000, Corolla GT, MR2, Gofl & Passat(112bhp), and so on. It will be a practical and considerate present for your good friends and family members.
BulletPoint2 : 【Powerfully Practical Function】: Brake caliper compression tool can be used to push back and forth brake pistons, replace brake pads/discs and install brakes. In addition, on the sides of the chuck head, the frontal gap size between pins is 25.5mm, and the reversed gap measures 16.3mm. These two different specifications can meet more of your needs.
BulletPoint3 : 【Sturdy & Durable Material】: Car rear brake pad wind back tool is made of premium and durable chromium-vanadium steel material. Chromium-vanadium steel is strong in toughness, with high forging hardness and a long service time. It resists rust and corrosion, wear and tear. Besides, the equipped top plate is thickened, not easy to deform and damage.
BulletPoint4 : 【Package & Specification】: Product's package includes 1 brake piston compressor tool with 1 top plate and 1 chuck head, which weighs 1.36 pounds, which is lightweight and easy for you to use, carry, and store in daily time. Brake piston compressor tool is 5.39×3.74 inches in size. The equipped top plate measures 3.54×1.77 inches.
BulletPoint5 : 【How to Operate】: First, lift your car and remove car wheels. Second, use the caliper piston tool's chuck to align the grooves after placing the retaining tabs on the brake tool. Third, rotate the brake caliper piston tool's hand lever. Fourth, compress the brake distributor pump's piston to install the brake pads on your car.
Color : Black + Silver
FitType : Vehicle Specific
IncludedComponents : 1 Brake Piston Compressor Tool with 1 Top Plate and 1 Chuck Head
IsAssemblyRequired : 1
ItemName : povtii Brake Caliper Piston Rewind Tool, Car Rear Brake Pad Wind Back Tool, Brake Piston Compressor Tool for Disk Brake Pad, Right Handle Set Brake Caliper Wind Back Tool, Car Accessories
ItemPackageDimensions_Height : 20.701 centimeters
ItemPackageDimensions_Length : 4.3942 centimeters
ItemPackageDimensions_Width : 11.4046 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : automotive-brake-adjusting-tools
Manufacturer : povtii
Material : Chromium-Vanadium Steel
ModelName : Brake Caliper Piston Rewind Tool
ModelNumber : Brake Caliper Piston Rewind Tool
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : povtii-2003RT
PartTypeId : 21601
ProductDescription :

Product Information:

Material: Chromium-Vanadium Steel

Quantity: 1 PC

Color: Silver & Black

Size: 5.39×3.74 inches

Package: 1 Brake Piston Compressor Tool with 1 Top Plate and 1 Chuck Head

Weight: 1.36 lb

Feature: Sturdy, Durable

Warm notes:

-Product fits most disc calipers mounted on right-hand threaded cars.

-Some pistons need to be turned by pressure. In this case, reaction plates and screws should be used.

-If the required reaction force is small, please use a 3/8-inch square head wrench and extensions to drive the key.

ProductSiteLaunchDate : 2024-01-31T04:09:23.996Z
Size : 5.98*4.7inches
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnspscCode : 25170000
WarrantyDescription : 0.2