Cart 2 india

Specification
AutomotiveFitType : universal_fit
Brand : PUWIGO
BulletPoint : Made in Taiwan
BulletPoint1 : The double flaring took kit include 1x 3/16 inch double flaring tool (removable handle), 1x double ended OP1/OP2 punch, 1x positioning bolt and 1x container of die lubricant
BulletPoint2 : This flaring tool is suitable 3/16 inch automotive brake nickel copper tubing Line. Not recommended for use on stainless steel tubing
BulletPoint3 : This compact and portable double flaring tool lets you easily create high quality 45-degree SAE double flares on 3/16 inch tubing such as brake lines
BulletPoint4 : Compact design lets you create perfect double flares both off vehicle and on vehicle, even in tight spots. Handle can be removed if you prefer to use in a bench vise
BulletPoint5 : Made of superior quality alloy steel, high hardness, strong pressure resistance, can greatly extend the service life. Tips: make sure you clean the brake line with brake clean then lock it down
BulletPoint6 : Made of High-Grade, Hardened Steel
Color : Silver
ExternallyAssignedProductIdentifier1 : 190735822760
ExternallyAssignedProductIdentifier2 : 0190735822760
ExternallyAssignedProductIdentifier3 : 00190735822760
FitType : Universal
GpsrSafetyAttestation : 1
Hazmat : auto-grounding
IncludedComponents : Flaring tool
IncludedComponents1 : Flaring Tool
IncludedComponents2 : 5 Adapters
IncludedComponents3 : Storage Case
IncludedComponents4 : Flaring Bar
ItemName : PUWIGO 3/16 inch Double Flaring Tool for Copper Steel Nickel Tubing 45 Degree SAE Flaring Tools for Brake Lines
ItemPackageDimensions_Height : 2.4 inches
ItemPackageDimensions_Length : 8.6 inches
ItemPackageDimensions_Width : 5.1 inches
ItemPackageQuantity : 50
ItemTypeKeyword : automotive-brake-flaring-tools
Manufacturer : PUWIGO
Material : steel
ModelName : X-005
ModelNumber : X-005
NumberOfBoxes : 1
NumberOfItems : 1
PackageLevel : unit
PartNumber : PU1022
PowerSourceType : NO
ProductDescription : Package Include
1x 3/16 inch double flaring tool (removable handle)
1x double ended OP1/OP2 punch
1x positioning bolt
1x container of die lubricant

How to Use
Step 1:
Loosen the (2) 10mm locking screws to allow tubing to be inserted into the tool.

Step 2:
Insert the metal tube and gently tighten the locking screw.
Insert the positioning bolt into the large threaded opening of the tool and tighten it.
Slide the clamp sleeve inward until it is flush with the locating bolt.

Step 3:
With the tubing positioned flush against the positioning bolt, tighten the locking screws to firmly secure the tubing. Unscrew and remove the position bolt.

Step 4:
Starts with the OP1 end. Lubricate the OP1 end of the punch with the included die lubricant.
Insert the OP1 end into the large threaded opening of the tool. Tighten the punch with a 17mm wrench.
The OP1 punch then makes a bubble flare. Unscrew and remove the punch.

Step 5:
Now, lubricate the OP2 end of the punch (opposite of the OP1 end) with the lubricant. Insert the OP2 end into the large threaded opening of the tool. Tighten the punch with a 17mm wrench to complete the double flare.

Step 6:
Unscrew and remove the punch. Loosen the locking screws to retrieve the tubing from the tool.

ProductSiteLaunchDate : 2025-03-19T11:25:15.522Z
Size : 5 in 1 kit
Style : German
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 27111700
WarrantyDescription : 1 Year Manufacturer