Cart 2 india

Specification
BatteriesRequired : 1
Brand : SÜA
BulletPoint : Sold on Amazon
BulletPoint1 : Heavy Duty Welding Lead Assembly manufactured with Made in USA Flex-A-Prene highly flexible cable. Cable Size: #2 AWG - 0.418" O.D.
BulletPoint2 : Electrode Holder compatible with AF-3. Heavy Duty Nylon body. High conductivity jaws. High strength coiled spring for a maximum grip of the electrode. Holds Electrodes up to 1/4". Ground Clamp compatible with EG-300. Constructed in Zinc-Plated Steel. Large hex screw cable connection assures a tight and safe cable connection. It has a large contact area for an effective ground connection. Its design eliminates arc blowing and facilitates fast grounding spot changing
BulletPoint3 : Cable Connector Options: LC-40 (Cam-Lock), Dinse 10-25, Dinse 35-70 or Terminal Lug. ***Please select your option from the menu, check the connector size in the picture and compare with your welder´s Connector/Receptacle to make sure it fits***
BulletPoint4 : RATED: 200 AMP @ 60% Duty Cycle. ***Please Check you welder´s maximum amperage and look for a cable assembly that matches or exceeds that amperage rating***
BulletPoint5 : Choose the Cables Length from the Menu. These leads are assembled to customer specifications the same day the order is received, they are packed and shipped on a cardboard box or a white USPS Flat Rate Package. You will receive a ready to use fully assembled lead, no tools required.
Color : Black
ContainsLiquidContents : 1
CustomerPackageType : Standard Packaging
ExternallyAssignedProductIdentifier1 : 840338524874
ExternallyAssignedProductIdentifier2 : 600136289357
ExternallyAssignedProductIdentifier3 : 0600136289357
ExternallyAssignedProductIdentifier4 : 0840338524874
ExternallyAssignedProductIdentifier5 : 00840338524874
GpsrSafetyAttestation : 1
IncludedComponents : soldering iron
IncludedComponents1 : Electric soldering iron*1
IncludedComponents2 : Soldering tip*5
ItemDisplayDimensions_Length : 7 inches
ItemDisplayWeight : 15.5 pounds
ItemName : SÜA - 200 Amp Welding Leads Set Assembly - Dinse 35-70 Connector - #2 AWG 100% Copper Cable (25 FEET Each Lead)
ItemPackageDimensions_Height : 5 inches
ItemPackageDimensions_Length : 10 inches
ItemPackageDimensions_Width : 10 inches
ItemPackageQuantity : 1
ItemTypeKeyword : welding-cable
LowerTemperatureRating : 392 degrees_fahrenheit
Manufacturer : SÜA
Material : Polymer
ModelName : SÜA® - 200 Amp Welding Leads Set Assembly - Dinse 35-70 Connector - #2 AWG 100% Copper Cable (25 FEET Each Lead)
ModelNumber : SET300-CX0021-FP0808_25
NumberOfChannels : 1
NumberOfItems : 1
PartNumber : SET300-CX0021-FP0808_25
PowerSourceType : ac
ProductDescription : This welding lead is assembled using Highly flexible, Made in the USA, Flex-A-Prene cable. All our cable assemblies use over-calculated Electrode Holders, Ground Clamps, and Connectors with an amperage capacity always higher than the assembly amperage rating. This prevents over-heating and increases safety. Information on cable is ident marked so it doesn't fade with time for a better identification even after years of use - Resists abrasion, cut, tear, flame, grease, oil, and water. The is the only welding cable that currently meets SAE J1127. INSULATION: EDPM jacket and paper separator - TEMP RANGE: -50°C to +105°C (-58°F to 221°F) - Rated 600 Volts. ***Before you buy please double-check the type and size of the cable Connector/Receptacle in your welder, Also check the maximum Amperage and duty cycle of your welder and look for a cable assembly that matches or exceeds that amperage rating***
ProductSiteLaunchDate : 2018-05-16T16:25:47.850Z
Size : 25 FEET - Dinse 35-70
SpecificUsesForProduct : Commercial/Residential
StreetDate : 2017-03-12T00:00:01Z
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
TemperatureStability : 392 degrees_fahrenheit
UnitCount : 1
UnspscCode : 23271800
UpperTemperatureRating : 896 degrees_fahrenheit
Voltage : 600 volts
Wattage : 90 watts
WebsiteShippingWeight : 0.045 kilograms