Cart 2 india

Specification
Brand : uxcell
BulletPoint1 : Polishing Set: 4 inch 10000 grit diamond polishing pads, 4 inch backing holder pad with M10 female thread, M10 male thread connecting rod. Suitable for wet polishing.
BulletPoint2 : Wide Applications: Perfect for concrete, marble, stone, quartz, tile, glass. Flexible diamond pads can be used for surface and edge polishing. Can be dry or wet use, but for best results are polished with water.
BulletPoint3 : Features: Nylon velvet, firmly bonded, can be repeatedly torn and pasted. The surface of the backer pad is closely arranged with hooks, which are attached closely for sticking ability. Can change polishing pads just in seconds.
BulletPoint4 : Easy to Install: First, Connect the M10 x 1.5 rod. Then, attach the hook and loop side of the polishing pad to the hook and loop side of the backing holder pad. Finally install the pad set on the grinder or polisher. Please never use with high speed grinder.
BulletPoint5 : Notices: Use a continuous flow of water at low RPM for best finish when wet polishing. Lower grits (30-200 grit) can be wet or dry use. The higher grits (300-10000 grit) must be used with water for the best results.
Color : Brown
CompatibleMaterial1 : Glass
CompatibleMaterial2 : Concrete
CompatibleMaterial3 : Stone
CompatibleMaterial4 : Ceramic
GpsrSafetyAttestation : 1
ItemName : uxcell 4 Inch 10000 Grit Diamond Wet Polishing Pad Set, for Stone Concrete Marble Grinder or Polisher, with M10 Hook and Loop Backing Holder Pad Connecting Rod
ItemPackageDimensions_Height : 17.1958 centimeters
ItemPackageDimensions_Length : 6.5024 centimeters
ItemPackageDimensions_Width : 13.1064 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : power-polisher-and-buffer-pads
Manufacturer : uxcell
Material : Diamond
ModelNumber : a21032300ux0184
PartNumber : a21032300ux0184
ProductDescription : Specifications:
Polishing Pads: 4 inch Diameter; 10000 Grit; Diamond Abrasive Material
Backing Holder Pad: M10 x 1.5 Female Thread; 4 inch (100mm) Diameter; 1.28 inch (32.5mm) Overall Height; Hook and Loop Type Backing Holder Pad; Max RPM: 12000; Made of ABS, Sponge, Carbon Steel
Connecting Rod: M10 x 1.5 Male Thread; 0.3 inch (8mm) Shank; Carbon Steel Material; Zinc Coated
Package Included: 2 Pack x Diamond Wet Polishing Pads, 1 Pack x Backing Holder Pad, 1 Pack x Connecting Rod

Descriptions:
1. 4 inch diamond polishing pads, 4 inch backing holder pad with M10 x 1.5 female thread, M10 x 1.5 male thread connecting rod. Features strong grinding power and good heat resistance.
2. Suitable for stone polishing, line chamfering, curved plate and special-shaped stone processing, and can also be used for special-shaped processing, repair and renovation of marble, cobblestone, ceramics and ceramic tiles.
3. Flexible diamond pads can be used for surface and edge polishing. Use on , vertical polishing machine, water polishing machine.
4. Nylon velvet, firmly bonded, can be repeatedly torn and pasted. The surface of the backer pad is closely arranged with hooks, which are attached closely for sticking ability. Can change polishing pads just in seconds.
5. 50-200 grit pads for coarse grinding, can be wet or dry use, but used with water for best results. Recommended speed: 1500-2500RPM. 300-8000 grit pads for polishing must be used with water for best results. Recommended speed: 3000-3500RPM, the maximum speed does not exceed 4500RPM.

Tips:
Clean the work surface before use. Otherwise, the grinding effect will be affected. Make sure the pad is centered on the backing plate. If it is not centered, it will shorten the life of the polishing pad. Always wear protection for your eyes, nose, mouth and hands. Never use a high-speed grinder and exceed the rated speed.


ProductSiteLaunchDate : 2021-08-03T16:11:35.943Z
Size : 10000 Grit
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 27112700