Cart 2 india

Specification
Brand : FPPO
BulletPoint1 : These polisher abrasive buffing wheel are used for Dremel DIY engraving, grinding, polishing.Ideal for Removing Rust/Corrosions from Any Metal Surfaces,fit for detail work on jade, ceramic, glass, wood, hardened steel, cast iron, stainless steel.
BulletPoint2 : Buffing wheels enable you to achieve a smooth, uniform finish and conformability to irregular surfaces.Widely used in derusting, grinding, sanding, deburring and stripping residue.
BulletPoint3 : Small buffing wheel is an efficient polishing tool of metal, with small, high efficiency, low cost,good wear resistance, durable and practical.
BulletPoint4 : Note- The speed of the tool should not be too fast. It is recommended to use the lowest gear. Excessive speed can easily cause the brush apart and affect the service life.
BulletPoint5 : Size:diameter about 1 inch(25mm).Shaft 3mm(approximatoly 1/8")
CompatibleDevices : Dremel
ConstructionType : Non-Woven
CustomerPackageType : Standard Packaging
ExternallyAssignedProductIdentifier1 : 728458904762
ExternallyAssignedProductIdentifier2 : 0728458904762
GpsrSafetyAttestation : 1
IncludedComponents : Ultra Fine ounce
ItemName : 50PCS Abrasive Buffing Polishing Wheel Set for Rotary Tools,Non-Woven scouring pad Brush Polishing kit,Grit 800 Removal of Rust,Deburring on Metal Surface,with 3mm Mandrel
ItemPackageDimensions_Height : 15.1892 centimeters
ItemPackageDimensions_Length : 5.588 centimeters
ItemPackageDimensions_Width : 10.3886 centimeters
ItemTypeKeyword : buffing-wheels
Manufacturer : FPPO
Material : scouring pad
ModelName : PG-103
NumberOfItems : 3
PartNumber : PG-103
ProductDescription :

Specifications:

Material: Scouring Pad

Color: Gray

Shank Diameter: 3mm / 0.12inch

Brush Diameter: 1"/25mm

Overall Length: 45mm / 1.77inch

Package Included:

Gray Grit 800: 50PCS Diameter 25mm

Features

1.These polisher abrasive buffing wheel are used for Dremel DIY engraving, grinding, polishing.Ideal for Removing Rust/Corrosions from Any Metal Surfaces,fit for detail work on jade, ceramic, glass, wood, hardened steel, cast iron, stainless steel.

2.Buffing wheels enable you to achieve a smooth, uniform finish and conformability to irregular surfaces.Widely used in derusting, grinding, sanding, deburring and stripping residue.

3.Small buffing wheel is an efficient polishing tool of metal, with small, high efficiency, low cost,good wear resistance, durable and practical.

4.Note- The speed of the tool should not be too fast. It is recommended to use the lowest gear. Excessive speed can easily cause the brush apart  and affect the service life.

Note

1. For safety, remember to wear goggle or eye protection in case scrap are thrown from the brush as it spins. 

2.You can test it on a small area first before applying it on a large area. 

3.The dimensions are measured by hand and may have a little error. Please don't mind.

ProductSiteLaunchDate : 2019-05-20T07:00:00.000Z
Style : 4pcs
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 3
UnspscCode : 31191600