Cart 2 india

Specification
Brand : BHA
BulletPoint : Single stitch buffing wheels are extremely flexible with very slight cutting action. Great for polishing hard to reach surfaces and to bring out the highest luster.
BulletPoint1 : 15 inch long sturdy wooden shaft
BulletPoint2 : 4.5" x 2" steel rake plate with 4 sets of teeth
BulletPoint3 : Designed to remove caked on or hardened buffing compound or rouge
BulletPoint4 : Prolongs the life of buffing wheel and increases buffs effectiveness
BulletPoint5 : Double-sided curved handle for use with both hands increasing safety for the operator
Color : Beige
CompatibleDevices : Any devices that can use abrasive wheels
CompatibleDevices1 : Die Grinder
CompatibleDevices2 : Angle Grinder
CompatibleDevices3 : Power Drill
ConstructionType : Coated
ExternallyAssignedProductIdentifier : 00840134210544
ExternallyAssignedProductIdentifier1 : 011499162100
ExternallyAssignedProductIdentifier2 : 0011499162100
GpsrSafetyAttestation : 1
IncludedComponents : Buffing Wheel Rake
IndustryStandardIdentifier : 40.0
ItemName : BHA 15" Buffing Wheel Rake for Removing Residual Buff Compound, Double Handle
ItemPackageDimensions_Height : 37.7952 centimeters
ItemPackageDimensions_Length : 4.0894 centimeters
ItemPackageDimensions_Width : 5.8928 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : buffing-wheels
Manufacturer : BHA
Material : Carbon Steel
MaximumRotationalSpeed : 15000 rpm
ModelName : BHA 15" Buffing Wheel Rake for Removing Residual Buff Compound, Double Handle
ModelNumber : BUFRAKE01
NumberOfItems : 1
PackageLevel : unit
PartNumber : BUFRAKE01
ProductDescription : The BHA 15" Buffing Wheel Rake features a 4-1/2" long x 2" wide steel rake plate with 4 sets of teeth attached to an ergonomically designed double handle wooden shaft. This rake is designed to remove residual buffing compound from the buffing wheels to prolong each buffs useful life and maintaining consistent buffing action. You should use this buffing rake when too much compound is applied or the compound has hardened on the edges. To use this buffing rake simply run the polisher, pedestal grinder, or lathe at normal speed and carefully allow the rakes teeth to make contact with the spinning buff. This rake can be held with both hands simultaneously for reduced operator fatigue and maximum safety.
ProductSiteLaunchDate : 2022-09-14T20:06:48.282Z
StreetDate : 2023-04-07T00:00:01Z
Style : 4" Curved+Flat
SupplierDeclaredDgHzRegulation : other
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 2
UnspscCode : 31191600