Cart 2 india

Specification
AgeRangeDescription : 10 years and up
Brand : Clxdq-718
BulletPoint : Default
BulletPoint1 : CNC machined aluminum housing with black/silver anodized finish ensures longer life and better performance .
BulletPoint2 : Compatible with existing storage gears, helm mounts, brass weights, overdrive door gears, armor and includes all hardware required for assembly.
BulletPoint3 : Front equal-speed derailleur (3-stage CVD) reduces judder in wide-angle turns. 
BulletPoint4 : Integrated C-hub, added caster, steering angle over 45 degrees, adjustable upper linkage mounts.
BulletPoint5 : Mounts to stock SCX10 III chassis, stock servo rod recommended. When attaching the stock driveshaft, the bevel gear's E-buckle will need to be removed. When using this servo mount, the proper bent linkage or short linkage will be required depending on the size of the servo arm.
Color : B Front Rear Axle
CpsiaCautionaryStatement : no_warning_applicable
ExternallyAssignedProductIdentifier1 : 0721713228764
ExternallyAssignedProductIdentifier2 : 721713228764
ItemName : AR45P Offset Portal Axle with Constant Velocity Driveshift Two Servo Mount and Steering Rodfor for 1/10 RC Crawler Car SCX10 III (B Front Rear Axle)
ItemPackageDimensions_Height : 2 inches
ItemPackageDimensions_Length : 8.66 inches
ItemPackageDimensions_Width : 2 inches
ItemTypeKeyword : hobby-rc-vehicle-bushings
Manufacturer : CLXDQ
ManufacturerMinimumAge : 18
Material : Aluminum
ModelName : TYL-1029002
NumberOfItems : 1
PartNumber : RXZER23
ProductDescription : AR45P Offset Portal Axle with Constant Velocity Driveshift Two Servo Mount and Steering Rod for 1/10 RC Crawler Car SCX10 III
Features：
CNC Machined Aluminum Housing
Black/Sliver Anodized
Front Constant Velocity Driveshift (3-section CVD)
With Less Jerks When Turning at Large Angles
Integrated C-hubs
Increased Caster
Over 45 Degrees of Steering
Adjustable Upper Link Mounts
Compatible with existing stores gears,servo mounts,Brass Weights,Overdrive Portal Gear,Armor
Includes All Hardware Needed for Assembly

Specifications:
Category: Front rear axle
Color: Black Red, Silver Red
Material: Aluminum alloy (bridge housing), medium carbon steel (inner shaft/output shaft/gear),stainless steel (ball head/servo rod/screw)
Total Width: 220mm/8.66in
5mm Axle Output Shaft
12mm Standard Hex
Hex thick:5mm
Steering angle: approximately 45 °
Bevel Gear Set: 8T/30T
Portal Gear Set: 12T/23T
Total Gear Ratio=7.19:1
Weight:
Front Axle Weight: 303g/10.69oz
Rear Axle Weigh: 216g/7.62oz

Note：
1.Installed on the original chassis of SCX10 III, it is recommended to use the original servo rod. When connecting the original transmission shaft, the E-shaped buckle of the umbrella teeth needs to be removed
2.To use this servo bracket, it is necessary to equip a suitable bending or short sized link according to the size of the servo arm
ProductSiteLaunchDate : 2024-10-29T08:42:53.828Z
SafetyWarning : 1. Do not swallow. 2. Supervision required. 3. Warning: Choking Hazard - Small parts. 4. Not suitable for children under 3 years.
SupplierDeclaredDgHzRegulation : not_applicable
TargetAudienceKeyword : Men
TargetGender : male
Theme : anime
UnspscCode : 26111500