Cart 2 india

Specification
Brand : Snapmaker
BulletPoint1 : Safer Working Environment: Snapmaker 2.0 Emergency Stop Button is designed to provide an extra layer of safety for 3D printing, laser engraving, and CNC carving. Simply press the stop button and your operation will come to a halt.
BulletPoint2 : Installation Location: Snapmaker 2.0 Emergency Stop Button can be installed practically anywhere. You can use Snapmaker 2.0 Rotary Module with it, installing it on the Snapmaker 2.0 or on the Enclosure for Snapmaker 2.0.
BulletPoint3 : Glowing Status Indicators: Snapmaker 2.0 Emergency Stop Button sends a stop signal to the controller at your command and has glowing status indicators, green for standby, flashing red for activated, and alternating between green and red for connecting, so you know you are protected.
BulletPoint4 : Dimension: Compatible with Snapmaker 2.0 A350 A250 A150, 48 width × 40 depth × 68 height (mm) without conversion plate, 48 width × 48 depth × 78 height (mm) with conversion plate.
BulletPoint5 : Rated Voltage: 24V, Rated Current: 0.01A, Product life: 10,000 times and more.
CircuitType : Single-Loop or Parallel
Color : Metallic Grey Finish
ConnectivityProtocol : X-10
ConnectorType : Crimp
ControlMethod : touch
CurrentRating : 0.01 amps
ExternallyAssignedProductIdentifier : 6971573447094
ExternallyAssignedProductIdentifier1 : 787477874883
ExternallyAssignedProductIdentifier2 : 0787477874883
GpsrSafetyAttestation : 1
InternationalProtectionRating : IP51
ItemName : Snapmaker 2.0 Emergency Stop Button, Safer, Glowing Status Indicators, CNC Carving, Compatible with A350 A250 A150, 24V, 0.01A
ItemPackageDimensions_Height : 23.7998 centimeters
ItemPackageDimensions_Length : 7.6962 centimeters
ItemPackageDimensions_Width : 19.5072 centimeters
ItemPackageQuantity : 1
ItemShape : Round
ItemTypeKeyword : buttons
Manufacturer : Shenzhen Snapmaker Technologies Co., Ltd.
Material : Metal
Material1 : Resin
Material2 : Nylon
ModelNumber : 71009
MountingType : Snap In Mount
NumberOfItems : 1
OperatingVoltage : 24 volts
OperationMode : ON-OFF
PartNumber : 71009
ProductDescription : Overall features:
Enables emergency stop during 3D printing, laser engraving, and CNC carving
Easy installation on the machine, the enclosure, or wherever is convenient
Glowing status indicators equipped
Consistent full-metal design

Compatibility: Snapmaker 2.0 A350 A250 A150

ProductSiteLaunchDate : 2021-08-01T07:00:00.000Z
SpecificationMet : UL
SupplierDeclaredDgHzRegulation : not_applicable
SwitchType : Rotary
TerminalType : Screw
UnitCount : 1
UnspscCode : 39122200
Voltage : 24 volts
Wattage : 0.24 watts