Cart 2 india

Specification
Brand : DuPont
BulletPoint1 : Premium performance, extendable self-adhered flashing material
BulletPoint2 : Can be applied over a wide range of building substrates, including non-nailable sheathing materials like PS foam board, fiberboard, concrete masonry unit (CMU) and other such materials
BulletPoint3 : FlexWrap NF products are three-layer assemblies consisting of a DuPont Tyvek top-sheet, an adhesive layer, and a release liner
BulletPoint4 : Helps to create airtight and water tight seals around windows, door sills, chimney breasts, pipe penetrations, and any custom shapes
BulletPoint5 : NF means no fasteners needed; It is self-adhered
Color : Black
CompatibleMaterial : Wood
CompatibleMaterial1 : Cement
CompatibleMaterial2 : Wood
ExternallyAssignedProductIdentifier1 : 083014403739
ExternallyAssignedProductIdentifier2 : 0083014403739
IncludedComponents : Tape
ItemName : DuPont FlexWrap NF Self Adhered Butyl Flashing Tape 9" x 15' Roll
ItemPackageDimensions_Height : 25.8064 centimeters
ItemPackageDimensions_Length : 16.4084 centimeters
ItemPackageDimensions_Width : 16.7894 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : butyl-tape
LowerTemperatureRating : -20 degrees_fahrenheit
Manufacturer : Dupont
Material : PS foam board, fiberboard, concrete masonry unit (CMU)
ModelNumber : D15523699
NumberOfItems : 1
PartNumber : D15523699
ProductDescription : DuPont FlexWrap NF is a premium performance, extendable self adhered flashing material that can be applied over a wide range of building substrates, including non nailable sheathing materials like PSfoam board, fiberboard, concrete masonry unit (CMU), and other such materials. DuPont FlexWrap NF self adhered flashing does not require mechanical fasteners, even in flexed corner areas around building openings. This allows it to provide easy, one-step insulation for hard-to-seal corners around windows and doors. FlexWrap NF is designed to help protect vulnerable corners against air and water intrusion, as part of a complete DuPont Building Envelope Solution. It’s effective across a range of window and door designs and a wide range of typical wall substrates. FlexWrap NF integrates easily with all DuPont air and water barriers, to help seal the building envelope for improved durability and energy efficiency. Correctly installed, FlexWrap NF can help stop water from getting at the corners of windows and doors. In turn, that can help prevent water damage, such as wood rot and corrosion,as well as mold. Keeping air and water out can also help maintain insulation R-value, for improved energy efficiency. DuPont FlexWrap NF means “no fasteners.” Instead, DuPont FlexWrap NF is a self adhered, extendable flashing backed with a 100 percent butyl based adhesive layer, making one-step installation and protection possible. And because it’s an extendible flashing material, DuPont FlexWrap NF can be stretched and wrapped into a rough window opening before the window is installed, or flashed around arched or custom-shaped windows, as well as other wall penetrations Warning: This product can expose you to chemicals which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm.
ProductSiteLaunchDate : 2017-09-07T00:08:41.391Z
RecommendedUsesForProduct : Outdoor, Wall
SafetyDataSheetUrl : http://www.dupont.com/content/dam/assets/products-and-services/construction-materials/assets/Tyvek_FlexWrap_NF.pdf
Size : 9" x 15'
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
SurfaceRecommendation : [Partial] PS foam board, fiberboard, concrete masonry unit (CMU), and other such materials
SurfaceRecommendation1 : Plastic
SurfaceRecommendation2 : Rubber
SurfaceRecommendation3 : Glass
SurfaceRecommendation4 : Wood
UnitCount : 1
UnspscCode : 31201500
UpperTemperatureRating : 176 degrees_fahrenheit
WaterResistanceLevel : water_resistant