MECCANIXITY 10Pcs Insulation Braided Cable Sleeve,3.3Ft-3/4 Inch ID White, High Temp Silicone Coated Fiberglass Sleeving for Cable Wrap, Automotive Hose Lines Electrical Wiring Protection

Customer rating 4.5 stars

Imported from USA | Ships in 10 working days

5% additional discount on UPI | Cash On Delivery available

1

₹13150 -30% ₹9200/-

The price at cart2india.com is inclusive of custom duties, GST, freight forwarding and other charges.

Free Shipping across India. Powered by BlueDart

Product Information


Specification
Brand : MECCANIXITY
BulletPoint1 : Silicone fiberglass insulation cable sleeves are an insulation product made from a braided fiberglass material that is coated in silicone rubber. Designed to fit over wires and cables without needing the application of heat. Braided cable sleeves are generally used whenever wires or cables require additional protection to survive in harsh environments, especially at high temperatures. Also offers good resistance to abrasion to protect and guide cables or wires in difficult locations.
BulletPoint2 : Material: Alkali-free Fiberglass; Length: 1m / 3.28ft; Inner Diameter: 18mm / 0.71inch; Thickness: 0.8mm / 0.03inch; Working Temp Range: –30℃~+400℃; Working Voltage: 1500V; Flame Resistance: VW-1. Color: White. In the package of 10 Roll high temp silicone fiberglass sleeves.
BulletPoint3 : Cable sleeve uses of fire sleeve applied to a motor, engine, plug wire, fuel lines, decorative light, mesh wire loom, etc. Common seen in industries such as automotive, marine, aircraft, electrical, etc. A cable wire loom protector is beneficial in all applications where the material is exposed to very high or low temperatures, high voltage work, and high altitude, as well as applications where conformity is necessary.
BulletPoint4 : Cut wiring loom sleeving with a HOT cutting to prevent fraying, if a hot cutting is not available, make sure to scorch the edges with another heat source (for example: use the flame from a lighter)
BulletPoint5 : Please notice this mesh wire loom sleeve is not slit down the middle. Electrical wires should never be hot. Need to increase the gauge of the wire if you are exceeding the recommended load of that wire. This braided wire loom would make the wire get hot by not letting it cool and might melt the insulation on said wire.
Color : White
ExternallyAssignedProductIdentifier1 : 628233100832
ExternallyAssignedProductIdentifier2 : 0628233100832
IncludedComponents : 25 feet of nylon sleeve
InstallationType : Screw-In
ItemName : MECCANIXITY 10Pcs Insulation Braided Cable Sleeve,3.3Ft-3/4 Inch ID White, High Temp Silicone Coated Fiberglass Sleeving for Cable Wrap, Automotive Hose Lines Electrical Wiring Protection
ItemPackageDimensions_Height : 4.92 inches
ItemPackageDimensions_Length : 12.99 inches
ItemPackageDimensions_Width : 7.87 inches
ItemPackageQuantity : 1
ItemShape : Tubelar
ItemTypeKeyword : cable-sleeves
Manufacturer : MECCANIXITY
Material : woven nylon
ModelNumber : mea240712ee001116
NumberOfBoxes : 1
NumberOfItems : 10
PackageLevel : unit
PartNumber : mea240712ee001116
ProductDescription : What is this?
Silicone Fiberglass Insulation Coated Sleeving is an insulation product made from a braided fiberglass material that is coated in silicone rubber. Designed to fit over wires and cables without needing the application of heat.It is generally used whenever wires or cables require additional protection to survive in harsh environments,especially at high temperatures.Also offers good resistance to abrasion to protect and guide cables or wires in difficult locations.

What will I get?
Material: Alkali-free Fiberglass
Length: 1m / 3.28ft
Inner Diameter: 18mm / 0.71inch
Thickness: 0.8mm / 0.03inch
Working Temp Range: –30℃~+400℃
Working Voltage: 1500V
Flame Resistance: VW-1
Color: White
In the package of 10 Roll high temp silicone fiberglass sleeves

Are there any advantages of the product?
Cable sleeve uses of fire sleeve applied to a motor, engine, plug wire, fuel lines, decorative light, mesh wire loom, etc. Common seen in industries such as automotive, marine, aircraft, electrical, etc. A cable wire loom protector is beneficial in all applications where the material is exposed to very high or low temperatures, high voltage work, and high altitude, as well as applications where conformity is necessary.

How to use it?
Cut wiring loom sleeving with a HOT cutting to prevent fraying, if a hot cutting is not available, make sure to scorch the edges with another heat source (for example: use the flame from a lighter)

What should I notice?
Please notice this mesh wire loom sleeve is not slit down the middle. Electrical wires should never be hot. Need to increase the gauge of the wire if you are exceeding the recommended load of that wire. This braided wire loom would make the wire get hot by not letting it cool and might melt the insulation on said wire.
ProductSiteLaunchDate : 2024-08-15T03:33:36.133Z
SafetyDataSheetUrl : MSDS
Size : 3.3Ft x 3/4Inch
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 10
UnspscCode : 43202218
WarrantyDescription : no

Questions & Answers

Have a question? Ask experts

?
No question found

Ratings & Review

Rating Breakdown (average)

5*
8
4*
3
3*
2
2*
0
1*
0

Read all 13 customer reviews

IÕm extremely impressed with this item.

Performs perfectly and looks amazing.

Meets basic needs, not exceptional.

Does the job but nothing extraordinary.

This is a game changer!

Lives up to the hype.

Performs well under regular usage.

Very useful and nicely packaged.

This is a game changer!

CanÕt believe how great this is.

Awesome product and great experience.

Best product IÕve bought recently.

A smart purchase for the price.

Have an opinion on this page? Let's hear it.