Cart 2 india

Specification
Brand : Lamons
BulletPoint : Brand: Green Leaf
BulletPoint1 : Outside Diameter (OD): 1-9/16"
BulletPoint2 : Inside Diameter (ID): 1-1/16""
BulletPoint3 : Thickness: 1/4" (.250")
BulletPoint4 : GREEN VITON / FKM, Precision Lathe Cut Gaskets
BulletPoint5 : Package Includes: 25 gaskets
Color : Green
ConnectorType : Male Adapter
ExteriorFinish : Aluminum
ExternallyAssignedProductIdentifier1 : 701575868896
ExternallyAssignedProductIdentifier2 : 0701575868896
ExternallyAssignedProductIdentifier3 : 00840194116428
IncludedComponents : fitting
ItemDisplayWeight : 0.63 pounds
ItemName : Lamons 100.CAMGAS.GRNFKMx25 1" CAMLOCK Gasket, CAM and Groove, Green VITON/FKM, (25 gaskets)
ItemPackageDimensions_Height : 6 inches
ItemPackageDimensions_Length : 6 inches
ItemPackageDimensions_Width : 6 inches
ItemPackageQuantity : 1
ItemShape : Round
ItemTypeKeyword : camlock-hose-fittings
LowerTemperatureRating : -20 degrees_fahrenheit
Manufacturer : Lamons
Material : Nitrile Rubber
Material1 : Viton, FKM
Material2 : Fluoroelastomers
Material3 : Rubber
ModelName : CamSocket-F200
ModelNumber : 100.CAMGAS.GRNFKMx25
NumberOfItems : 25
NumberOfPieces : 1
PackageLevel : unit
PartNumber : 100.CAMGAS.GRNFKMx25
ProductDescription : WARNING : Under no circumstances should cam and groove couplings be used for compressed air or steam service.

Dixon Reducing Cam and Groove Female Cam Coupler x Male Cam Adapter for transitioning sizes between two camlock fittings. These camlock fittings are available from 1-1/2" up to 4" in 356T6 Aluminum or 316 Investment Cast Stainless Steel. The pressure rating for these fittings is based on the seal of the mating part.

Note: The 4" x 2" (4020-DA-SS) stainless steel fitting is produced as a welded fabrication.

Dixon camlock fittings are all precision machined to rigid tolerances and designed to be interchangeable with all products produced to Commercial Item Description A-A-59326B. However, no standard exists for the 1/2" and 8" fittings and generally these will not interchange with other manufacturers. All couplers, regardless of casting material, utilize durable stainless steel cam arm pins that will not rust or bind. The couplers also feature a recess to hold the gasket firmly in place, ensuring proper placement and eliminating any chance for leakage.

Cam and Groove fittings are designed for use as a hose coupling that allows quick connect capabilities to increase operator productivity. To secure a connection, simply slide the adapter into the coupler, and with normal hand pressure press the cam levers down. Uncoupling is just as simple, just lift the cam arms and remove the adapter. Dixon also offers Dust Plugs and Dust Caps to keep hoses and process tubes clean while fittings are disconnected.

Dixon Cam and Groove Fittings Features:

- Precision Machined
- Rigid Tolerances
- Recessed Gasket Slots
- Buna N Seal Standard (alternates available)
- Stainless Steel Cam Arm Pins
- Interchangeable with most manufacturers
ProductSiteLaunchDate : 2016-12-02T21:42:39.045Z
Size : 1"
StreetDate : 2017-03-12T00:00:01Z
Style : reducer
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 31400000
UpperTemperatureRating : 350 degrees_fahrenheit