Cart 2 india

Specification
Brand : GMBYLBY
BulletPoint1 : Standby current (all relays closed) 12MA, 1 open 40MA, 2 relays open 69MA, 3 relays open 95MA,4 relays open 122MA,5 relays open 149MA,6 relays open 174MA, 7 relays open 198MA,8 relays open 224MA.
BulletPoint2 : MODBUS RTU command, Support 03 06 16 function code.
BulletPoint3 : ''open''''close''''Momentary''''Self-locking''''Delay'' 6 Commands.
BulletPoint4 : MODBUS commands can be made serial HyperTerminal (serial assistant) ''Modbus Poll'' Enter.
BulletPoint5 : Under the ''Delay'' command ,the delay is 255 seconds.
ExternallyAssignedProductIdentifier : 7629470632875
ItemName : GMBYLBY RS485 N438B08 12VDC 8CH PC UART Serial Port Switch for PLC Camera Industrial Control System PLC Camera Industrial Control System
ItemTypeKeyword : cell-phone-car-chargers
Manufacturer : GMBYLBY
PartNumber : GMBYLBY
ProductDescription : RS485 N438B08 12VDC 8CH PC UART Serial Port Switch for PLC Camera Industrial Control System PLC Camera Industrial Control System
Features:
Brand new and
Working voltage 12V.
Standby current (all relays closed) 12MA, 1 open 40MA, 2 relays open 69MA, 3 relays open 95MA,4 relays open 122MA,5 relays open 149MA,6 relays open 174MA, 7 relays open 198MA,8 relays open 224MA.
Enhanced RS485 interface protection (TVS).
''open''''close''''Momentary''''Self-locking''''Delay'' 6 Commands.
MODBUS RTU command, Support 03 06 16 function code.
Under the ''Delay'' command ,the delay is 255 seconds.
MODBUS commands can be made serial HyperTerminal (serial assistant) ''Modbus Poll'' Enter.
Under the MODBUS command mode, it can support up to 64 devices in parallel.
The default baud rate is 9600BPS. The baud rate can be selected through jumpers: 2400 4800 9600 19200BPS.

Specifications:
Size: 145x90x40mm
load: 10A / 250VAC, 10A / 125VAC, 10A / 30VDC, 10A / 28VDC, 10A / 12VDC

Package Includes:
1PC x 12V Channel RS485 Modbus Rtu Board

Note:
Due to the problems of lighting effects and angles, there will be certain tolerances in the product, please understand.
Please allow 0-1cm error due to the manual measurment.
ProductSiteLaunchDate : 2024-05-15T15:24:34.000Z