Cart 2 india

Specification
Brand : VIIMAKE
BulletPoint1 : 【Easy to Peel off &Usage Tips】:The rectangular adhesive pad has a small ear corner on the upper right side, which is easy to tear off and easy to peel off from the red VHB film. Correct the position of the base and paste Just press a few times and paste it on the dashboard, and wait for 24 hours before using it. To achieve the bonding effect, the bonding surface must be clean and dry.
BulletPoint2 : 【For Most Car Dashboard Mount Base】:Size is: Size: 1.89" ×1.1", the thickness is 0.05". VIIMAKE rectangular 3M adhesive sticky replacement fit 95% magnetic phone car mount with rectangle stick-on base.,compatible with Wizgear,Trainium,Scosche,TACKFORM,Bextrix,PLDHPRO,Ailun,etc.
BulletPoint3 : 【Instructions for use】: ①Clean the area to be attached and keep it dry②When the tape is glued, apply the appropriate pressure evenly, please hold down for 10 to 30 seconds Step③After pasting, it is recommended not to use immediately, to maintain the stability of the later paste, the better the effect is after 24 hours of pasting, the longer the sticking time, the stronger the stickiness.(3M Vhb adhesive pad is one-time use item)
BulletPoint4 : 【Heat Resistance&Strong Stickness】:The double-side adhesive pad is a three layer material.These new mounting tapes adopt top 3M VHB super strong black gel, stickiness is 40% stronger than original one, high temperature and low temperature resistance, no problem using in hot Summer when you driving car, truck, vehicle, uber in florida etc.
BulletPoint5 : 【High Bonding Adhesive】:3M double-sided tape replaces screws and rivets, without screws, welding, rivets, bolts, fasteners and adhesives. It remains stable even on bumpy roads, and can actually increase strength over time. Moreover, it is easy to peel without leaving any sticky residue.
Color : Red
CompatibleMaterial : Metal
CompatibleWithVehicleType : Passenger Car
CustomerPackageType : Standard Packaging
ExternallyAssignedProductIdentifier : 7629051008563
ItemName : 6pcs Rectangle 3M Sticky Adhesive Replacement Kit, for Magnetic Car Dashboard Phone Mount Base Sticker Parts,VIIMAKE Double Side 3M VHB Tape Adhesive Pads (Red)
ItemPackageDimensions_Height : 14.097 centimeters
ItemPackageDimensions_Length : 0.889 centimeters
ItemPackageDimensions_Width : 10.1092 centimeters
ItemTypeKeyword : cell-phone-car-cradles-and-mounts
Manufacturer : VIIMAKE
Material : 120 Grit
NumberOfItems : 6
PartNumber : R980P
ProductDescription : Norton Blaze 2X72 Grinding Belts 5 Packs
ProductSiteLaunchDate : 2021-04-08T07:00:00.000Z
Size : 1.89" ×1.1"×0.05"
SupplierDeclaredDgHzRegulation : not_applicable
SurfaceRecommendation : Metal
UnitCount : 6
WaterResistanceLevel : waterproof