Cart 2 india

Specification
AssemblyTime : 5
Brand : Fine Laser Designs
BulletPoint : - Huge quality of life imrovement (body comes on and off in seconds) - Easy install (under 10 minutes) - Very robust material
CpsiaCautionaryStatement : no_warning_applicable
ExternallyAssignedProductIdentifier1 : 0694223100427
ExternallyAssignedProductIdentifier2 : 694223100427
IncludedComponents : Qty 2 - M3x16mm, Qty 2 - M2.5x16mm, Qty 2 - M2.5 Nuts, Qty 3 - Plastic Parts
IsAssemblyRequired : 1
ItemName : Clipless Body Latch System for SCX10 III CJ-7
ItemPackageDimensions_Height : 0.5 inches
ItemPackageDimensions_Length : 7 inches
ItemPackageDimensions_Width : 5 inches
ItemTypeKeyword : hobby-rc-vehicle-body-clips
Manufacturer : Fine Laser Designs
ManufacturerMinimumAge : 168
Material : Plastic
ModelName : Clipless Body Latch System for SCX10 III CJ-7
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : 694223100427
ProductDescription : Do you want to never use body clips again? This clipless body latches bolts directly onto your SCX10.3 CJ-7 with ZERO modification to the truck (100% reversible). It snaps into the lower portion of the truck and allows for a secure hold on the body without using body clips. This system includes a front and rear latch. The front latch uses existing holes and hardware for the front radiator and lights. The rear bolts onto the rear cage and onto the rear of the chassis. Simply press towards the center of the truck on the bottom of the front latch, then pull the rear latch towards the outside of the truck and the body releases allowing you to open it up. When running trails or crawling rocks the latch stays secure and holds the body in place. I do not recommend picking up the truck using the roll cage when using these mounts as it puts all the pressure into the mounts.
ProductSiteLaunchDate : 2024-07-16T20:17:45.996Z
SafetyWarning : WARNING: Please watch the installation video to become familiar with the parts included and general operation of the product before operating. Failure to operate the product correctly can result in damage to the product, personal property and cause serious injury. This is a sophisticated hobby product. It must be operated with caution and common sense and requires some basic mechanical ability. Failure to operate this Product in a safe and responsible manner could result in injury or damage to the product or other property. This product is not intended for use by children without direct adult supervision. Do not use with incompatible components or alter this product in any way outside of the instructions provided by Fine Laser Designs.
SupplierDeclaredDgHzRegulation : not_applicable
TargetAudienceKeyword : Boys
UnspscCode : 60140000