Cart 2 india

Specification
AgeRangeDescription : Adult
BraceletForm : bangle
Brand : Tds Online Store
BulletPoint : Replacement 6" x 6" mesh screens are for use with 6" or 9" tripods
BulletPoint1 : 3 inch by 1 1/2 inch
BulletPoint2 : Make unique bracelets from wire or bangles
BulletPoint3 : Can be used with hammer or hydraulic press
BulletPoint4 : [Anvil Blacksmithing Easy to Carry]: Blacksmith anvil and anvil blacksmith is very suitable for smaller jobs, this portable anvil and cast steel anvils for blacksmithing can be taken to the work site
BulletPoint5 : [Iron Horn Anvil Bench Block Rounded Corners and Flat Corner Structure]: Rounded corners are used for smooth bending and forming, and flat corners are used for accessories, stamping and beating for portable rugged cast iron single horn anvil, anvil tools, anvil single horn; sturdy base keeps firm
ClaspType : Slide
Collection : All
Color : Green
ExternallyAssignedProductIdentifier : 7638619141406
GradeRating : High Quality
ItemLength : 3 inches
ItemName : Bangle Dapping Die Large 14 Wave
ItemPackageDimensions_Height : 0.25 inches
ItemPackageDimensions_Length : 6 inches
ItemPackageDimensions_Width : 6 inches
ItemPackageQuantity : 1
ItemShape : Round
ItemTypeKeyword : jewelry-casting-tools
Manufacturer : Liberty
Material : Aluminum
ModelNumber : SOLD-0033
NumberOfBoxes : 1
PartNumber : 14wv
ProductDescription : Now make patterned or "wavy" bangles and hoop earrings without the need for a hydraulic press! This Bangle Forming Die is easy to use. All you will need is heavy, lead-filled rawhide mallet and a sturdy benchtop. First create your bangle or hoop out of wire Next separate the halves of the die. Place your bangle in between the halves making sure to center it. Replace the top half of the die and give it a good solid WHACK! Now make patterned or "wavy" bangles and hoop earrings without the need for a hydraulic press! This Bangle Forming Die is easy to use. All you will need is heavy, lead-filled rawhide mallet and a sturdy benchtop. First create your bangle or hoop out of wire Next separate the halves of the die. Place your bangle in between the halves making sure to center it. Replace the top half of the die and give it a good solid WHACK! The solid steel die is designed so that the halves always line up perfectly. It also comes with 3 aluminum spacers to help keep your bangle centers (the spaces will get deformed during use, but that is ok). The die is approximately 3" in diameter and 1-1/2" thick.
ProductSiteLaunchDate : 2017-11-15T08:00:00.000Z
Size : black
Style : Retro
SupplierDeclaredDgHzRegulation : not_applicable
TargetGender : unisex
Theme : Solid
UnitCount : 1
UnspscCode : 54100000