Cart 2 india

Specification
Brand : CUSTOM
BulletPoint1 : 10.5 Oz
BulletPoint2 : #122 Linen
BulletPoint3 : Use around tubs and sinks
BulletPoint4 : Use where horizontal and vertical surfaces meet
BulletPoint5 : Siliconized for ease of use.
Color : Linen
CompatibleMaterial : Norton SpeedGrip structural adhesives
CustomerPackageType : Standard Packaging
ExternallyAssignedProductIdentifier1 : 010186773308
ExternallyAssignedProductIdentifier2 : 0010186773308
ExternallyAssignedProductIdentifier3 : 00010186773308
ItemForm : Strip
ItemName : Custom BLDG Products CUSTOM-PC12210S-6-10.5oz Custom Polyblend PC12210S-6 Ceramic Tile Caulk Linen 10.5 oz Cartridge, Sahara Tan
ItemPackageDimensions_Height : 32.8 centimeters
ItemPackageDimensions_Length : 5.1 centimeters
ItemPackageDimensions_Width : 5.3 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : hand-caulking-guns
LiquidVolume : 10.5 fluid_ounces
Manufacturer : CUSTOM BLDG PRODUCTS
Material : Siliconized Acrylic
MaximumGapFill : 0.25 inches
ModelName : 636425-41400
ModelNumber : PC12210S-6
NumberOfItems : 1
PackageLevel : unit
PartNumber : PC12210S-6
PowerSourceType : Manual
ProductDescription : This ceramic tile caulk is for caulking around sinks, tubs, showers and where tile meets tile or another surface. Also adheres bath fixtures and loose tile. Do not use to install grab bars. Maximum joint width and depth should not exceed 1/4" (6 mm). Do not use in areas with constant water exposure. For interior use only. 10.5 Oz #122 Linen Use around tubs and sinks Use where horizontal and vertical surfaces meet Siliconized for ease of use. Suitable Tile Types Around tubs, showers and sinks Bonds bath fixtures and loose tiles. Composition of Product Siliconized acrylic latex resins with fine fillers and colored pigments. Benefits
For caulking around sinks, tubs and showers Adheres bath fixtures and loose tile For joint up to (6mm) wide and deep For interior use. Instructions Surfaces should be clean, dry and free of all contamination. Place cartridge in standard caulking gun. Cut tip off nozzle on a slant to desired opening size and completely fill joints with caulk. Smooth with wet finger. Clean off excess caulk with soap and water before it cures. Do not apply when temperature falls below 50F (10C).
ProductSiteLaunchDate : 2011-12-29T21:59:45.979Z
Size : 220 mL
StreetDate : 2012-11-23T00:00:01Z
Style : Heavy-Duty Structural Adhesive Applicator
SupplierDeclaredDgHzRegulation : not_applicable
SurfaceRecommendation : Tub
UnitCount : 1
UnspscCode : 31201600
WaterResistanceLevel : waterproof