Cart 2 india

Specification
Brand : Form-A-Tread
BulletPoint : Baths, sinks and toilets
BulletPoint1 : INCLUDES: Form-A-Tread Manual Epoxy Applicator Dispensing Tool Gun for 400mL Cartridges. High thrust tool used to dispense Form-A-Tread Epoxy compatible with 400mL cartridges. To make applying Form-A-Tread even easier for commercial applications or big projects, use our cordless applicator (CLT400).
BulletPoint2 : IMPROVE SAFETY, TRACTION, AND VISIBILITY: Due to the excellent heat resistance, Form-A-Tread lasts years and bonds to any common building surface. Use it indoors or outdoors, for pedestrian and vehicle traffic to improve the grip on Wet, Oily, or Slippery surfaces. For an even grippier tread, try our Heavy and Light Duty Shake Tread Grit!
BulletPoint3 : MULTI-PURPOSE: Perfect for stairs, ramps, ladders, walkways, automobiles, pontoon boats, recreational vehicles ( RV ), trucks, trailers, docks, mobility scooters, and garages. You can even create custom grip tread for your skateboard if you’re feeling adventurous!
BulletPoint4 : SAFE AND WORKS ON ANYTHING: Use Form-A-Tread in or around pools due to the advanced chemical, moisture and UV resistance. Adheres to nearly any surface such as concrete, wood, and metal. Our formula is solvent free, contains no isocyanates, is non-flammable, very low odor and contains NO VOC’s
BulletPoint5 : EASY TO INSTALL, DRIES FAST: Depending on the temperature, ready to go after application in less than 12 hours. Do not apply Form-A-Tread when the ambient temperature is below 45°F (7°C). To make the job even easier, our cartridges are compatible with a dispensing tool gun. (See MDT400 or CLT400 for manual and cordless options) Simply clean the surface thoroughly and place the tape where you want to prevent the epoxy from spreading to
Color : BLUE
CompatibleMaterial : Plastic
CompatibleMaterial1 : Plastic
CompatibleMaterial2 : Vinyl
CompatibleMaterial3 : Metal
CompatibleMaterial4 : Glass
CustomerPackageType : Standard Packaging
ExternallyAssignedProductIdentifier : 7426898411460
ExternallyAssignedProductIdentifier1 : 0663250203203
ExternallyAssignedProductIdentifier2 : 663250203203
IncludedComponents : Unit^Instruction Guide
ItemDisplayDimensions_Height : 17 centimeters
ItemDisplayDimensions_Width : 32 centimeters
ItemForm : Strip
ItemName : Form-A-Tread Manual Epoxy Applicator Dispensing Tool Gun for 400mL Cartridges
ItemPackageDimensions_Height : 30.988 centimeters
ItemPackageDimensions_Length : 9.906 centimeters
ItemPackageDimensions_Width : 18.542 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : hand-caulking-guns
ItemVolume : 50 milliliters
Manufacturer : Form-A-Tread®
Material : Metal
MeasurementSystem : Metric
ModelNumber : 09125
NumberOfBoxes : 1
NumberOfItems : 1
PackageLevel : unit
PartNumber : MDT400
ProductDescription : A hi-thrust tool used to easily dispense the Form-A-Tread 400ml cartridge.
ProductSiteLaunchDate : 2018-11-03T07:00:00.000Z
StreetDate : 2016-12-07T00:00:01Z
Style : Manual (MDT400)
SupplierDeclaredDgHzRegulation : not_applicable
SurfaceRecommendation : Tub
UnitCount : 1
UnspscCode : 27112700
WaterResistanceLevel : waterproof