Cart 2 india

Specification
Brand : Farmer Bob's Parts
BulletPoint1 : The original belt drive standard since 1964. Time tested and field proven design. Widespread parts and service availability. Most Economical belt drive. Standard 21 spline 1-3/8" (34.9 MM) split bore shaft with locking collar for 1000 RPM PTO models. Port sizes: Inlet 1-1/4" NPT, Outlet 1" NPT. Max Pressure: 80 PSI Max Flow: 65 GPM Weight: 45 lbs
BulletPoint2 : 69C6, 69CPTOC100021SP, PTOC100010, PTOC100021SP
BulletPoint3 : PTOC Series
BulletPoint4 : Centrifugal
BulletPoint5 : Fluid Inlet Size: 1" NPFT
Color : Green
ExternallyAssignedProductIdentifier : 4973583103238
ExternallyAssignedProductIdentifier1 : 0731515742924
ExternallyAssignedProductIdentifier2 : 731515742924
ItemName : Ace Belt Driven Centrifugal Pump 21-Spline 1.25" Suction x 1" Discharge @ 65 GPM Farmer Bob's Parts PTOC-1000-21SP
ItemPackageDimensions_Height : 0.79 inches
ItemPackageDimensions_Length : 10.63 inches
ItemPackageDimensions_Width : 7.48 inches
ItemPackageQuantity : 1
ItemShape : Round
ItemTypeKeyword : industrial-centrifugal-pumps
Manufacturer : ACE Pump
Material : Cast Iron
ModelNumber : M5Y1384608Y
NumberOfItems : 1
NumberOfLithiumMetalCells : 1
PartNumber : PTOC-1000-21SP
ProductDescription : PTOC-1000-21SP Suction 1-1/4" Female Pipe Thread Discharge 1" Female Pipe Thread Chemical Resistant Valox Impeller Standard Viton Carbon/Ceramic Mechanical Seal Spring loaded idler absorbs shock of PTO engagement New BAC-15-PIN feature ensures proper alignment Cast iron centrifugal with for direct mount on 21 spline, 1-3/8", 1000 RPM PTO Shaft Maximum Gallons Per Minute - 65 GPM Maximum PSI - 80 PSI Do Not Run Dry - Seal damage will result from running dry. Impeller damage may also occur if run dry for an extended period. Do Not Run With Flow Shutoff For Extended Periods - Running the pump with no flow for extended periods of time will result in excessive heat and pump failure. A continuous bypass is recommended for low flow applications Maximum PSI - 80 PSI Do Not Run Dry - Seal damage will result from running dry. Impeller damage may also occur if run dry for an extended period. Do Not Run With Flow Shutoff For Extended Periods - Running the pump with no flow for extended periods of time will result in excessive heat and pump failure. A continuous bypass is recommended for low flow applications
ProductSiteLaunchDate : 2019-09-30T20:26:04.090Z
Size : 2X1CM
Style : Diaphragm
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 40151500