Specification Brand : Wisoqu BulletPoint1 : Electronic Password Lock Working Principle: Unlike traditional mechanical locks, this bike chain lock does not have a keyhole and is unlocked and locked using a keypad. The 4 digit password can be formed from the numbers 1, 2, 3, and 4, allowing for 256 combinations, such as 1234, 1123, 1113, 4411, 2323, etc. The default password is: 1234. BulletPoint2 : Battery Installation Method: Unscrew the battery cover, install 3 3A batteries, ensuring correct polarity. You will hear 2 short beeps. Then, cover the electric lock with the water silicone, replace the battery cover, and secure 2 battery cover screws (Note: The screws must be tightened; otherwise, the lock may trigger an alarm after locking). BulletPoint3 : Locking Procedure: Insert the smart lock head completely, press the middle Key, and you will hear 3 beep prompt. At this time, pushing the side lock lever Key will not allow you to pull out the lock head, indicating that the lock is engaged. While locked, the LED light will flash once every 3s. Note: After locking, the alarm detection state is activated after 5s. If the alarm is triggered, please enter the password and press the middle Key to deactivate the alarm. BulletPoint4 : Unlocking Procedure: In the locked mode, input the password (default password 1234) and press the middle Key. You will hear a long beep, and the LED light will turn off, indicating it is unlocked. At this point, press and hold the lock lever Key to remove the lock head. BulletPoint5 : Vibration Alarm: The alarm will auto stop after 30s, and entering the correct password can immediately stop the alarm. After locking, you will hear a 1s warning beep 5s later. If there is no touch after 3s intervals, the system will enter a re detection mode, and if unattended, it will trigger an alarm after 15s. Ensure the main unit is unlocked, the vibration alarm mode can be turned on or off. To turn off, press and hold Key 2 for 3s until you hear one beep, then release. To turn it back on, Color : #911 IncludedComponents : Lock ItemDisplayDimensions_Height : 0.22 inches ItemDisplayDimensions_Length : 23.62 inches ItemDisplayDimensions_Width : 1.97 inches ItemDisplayWeight : 1.1 pounds ItemName : Smart Bike Chain Lock, Keyless Bike Lock Chain, Over 110dB Alarm Sound, Heavy Duty Anti Theft, IP44 for Scooter, Motorcycle, Door, Gate, Fence ItemPackageDimensions_Height : 5 centimeters ItemPackageDimensions_Length : 24 centimeters ItemPackageDimensions_Width : 11 centimeters ItemTypeKeyword : chain-bike-locks Manufacturer : Wisoqu Material : Manganese Steel ModelName : Chain Locks ModelNumber : Wisoqu84enigp2ms PartNumber : Wisoqu84enigp2ms ProductDescription : Spec: Item Type: Chain Lock Material: Alloy Steel, ABS, Stainless Steel Battery Type: 3A Battery (Not Included) Battery Quantity: 3 Default Password: 1234 Battery Life: Standby Mode, Approximately 8 Months or More Steel Chain Specifications: Diameter 6mm / 0.2in, Length 80cm / 31.5in Operating Temperature: -20°C -60°C Storage Temperature: -30°C-80°C Water IP44 Features: 1. Alarm immediately when the lock body is vibrated or moved. 2. Alarm immediately when the steel rope is cut or the lock body screws are removed. 3. Alarm immediately after three incorrect password attempts. 4. Alarm sound reaches 110 decibels or above. 5. Four digit password, 256 password combinations. 6. Locking Unlocking Key operating, no need for key. 7. Low battery reminder function.
Change Password: 1. Make sure the device is unlocked before proceeding. 2. Press and hold the Key for 3 seconds until you hear a beep, then release it. The red light will flash, enter the original password (default password is 1234), you will hear 2 beeps, then enter a new four digit password (digits can be repeated, e.g. 1121). After entering, you will hear 3 beeps and the password will be successfully changed.
packing list: 1 x Chain Lock 1 x Screwdriver 1 x User Manual