Cart 2 india

Specification
Brand : Hilitand
BulletPoint1 : Chamfer end mill -- Professional chamfering design can engrave and polish the workpiece without unloading. The chamfering cutter is of standard size and can be used as aluminum-copper milling tool and engraving milling cutter bit.
BulletPoint2 : Application -- V router bits can be used in cnc router hand and table mount, and most brand handheld routers with 1/4 inch collets. Applicable for hard wood, plywood, soft wood, oak, and metals under hrc 55.
BulletPoint3 : 60° -- The chamfering tool is mainly used for 60° chamfering or taper hole of the workpiece, and chamfering the edges and corners of each
BulletPoint4 : 1/4 inch Shank -- Round shanks allow use with a wide variety of toolholding systems. The unique one-piece design makes it easier for the debris generated in the cutting process to fall without clogging the tool.
BulletPoint5 : 3 Flutes -- The 3‑flutes design can complete the processing of the conical at one time, which is suitable for small cutting amount processing.
CutType : Taper
FinishType : Finish
IncludedComponents : inc
ItemName : Hilitand Chamfer End Mill, 60 Degree 3 Flutes 1/4 inch Shank Tungsten Steel Router Bit for CNC Carving and Chamfering(D3 x 60° x 50L)
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 7 centimeters
ItemPackageDimensions_Width : 1 centimeters
ItemPackageQuantity : 1
ItemShape : Round
ItemTypeKeyword : chamfer-mills
Manufacturer : Hilitand
NumberOfFlutes : 3
NumberOfItems : 1
PartNumber : Hilitand79ry2qg1eu322-16
ProductDescription : Specification:
Item Type: Chamfer End Mill
Material: Tungsten steel
Chamfer: 60°
Application: Aluminum and copper milling cutter tools, engraving milling cutter bits
Specification:
D12 x 60° x 75L
Tip Diameter: Approx. 12mm / 0.5in
Shank Diameter: Approx. 12mm / 0.5in
Total Length: Approx. 75mm / 3in
D10 x 60° x 75L
Tip Diameter: Approx. 10mm / 0.4in
Shank Diameter: Approx. 10mm / 0.4in
Total Length: Approx. 75mm / 3in
D8 x 60° x 60L
Tip Diameter: Approx. 8mm / 0.3in
Shank Diameter: Approx. 8mm / 0.3in
Total Length: Approx. 60mm / 2.4in
D6 x 60° x 50L
Tip Diameter: Approx. 6mm / 0.2in
Shank Diameter: Approx. 6mm / 0.2in
Total Length: Approx. 50mm / 2in
D4 x 60° x 50L
Tip Diameter: Approx. 4mm / 0.2in
Shank Diameter: Approx. 4mm / 0.2in
Total Length: Approx. 50mm / 2in
D3 x 60° x 50L
Tip Diameter: Approx. 3mm / 0.1in
Shank Diameter: Approx. 3mm / 0.1in
Total Length: Approx. 50mm / 2in

Package List:
1 x Chamfer End Mill

ProductSiteLaunchDate : 2022-02-08T00:00:00.000Z
Size : D3 x 60° x 50L
SupplierDeclaredDgHzRegulation : not_applicable
ToleranceHeld : Standard
UnitCount : 1
UnspscCode : 27112803