Cart 2 india

Specification
Brand : Pontuss
BulletPoint1 : Versatility: The dual check valve is designed for smaller supply lines, ideally for laboratory equipment, processing tanks, sterilizers, dairy equipment and similar applications. It is especially recommended for boiler feed lines to prevent the return pressure from being lower than the system pressure during supply.Compatible with all major brands.
BulletPoint2 : Product Parameter: Series 9D is suitable for use on hot or cold water and can be used under continuous pressure.Temperature range: 33°F – 210°F. Maximum Working Pressure:175psi (12.1 bar). Minimum Required Pressure: 25psi (1.7 bar).Inlet & Outlet connection size 1/2 IN, Thread Type NPT.
BulletPoint3 : Qualitative Materials: Backflow preventer construction consists of brass body, stainless steel working parts, integral filter and durable rubber disc. The inlet and outlet of the inner connector are connected. Main check valve with rubber disc seat combined with matching rubber parts to ensure tight closing.
BulletPoint4 : Notice: To avoid water damage from valve operation, a drain pipe must be installed, which should terminate about 12 inches above the floor drain. If used on a boiler, do not use an air gap joint on the surface to prevent scalded water or base steam from causing personal injury. Exhaust ports or discharge lines should not be blocked under any circumstances.
BulletPoint5 : Satisfactory Service: Your satisfaction is always our persistent pursuit, if you have any questions in the use of products, you can always communicate with us, looking forward to serving you.
Color : Brass
ConnectorType : Quick-connect
CustomerPackageType : Standard Packaging
ExteriorFinish : Rubber
ExternallyAssignedProductIdentifier1 : 699838471467
ExternallyAssignedProductIdentifier2 : 0699838471467
GpsrSafetyAttestation : 1
IncludedComponents : Backflow Preventer
ItemName : 1/2" 9D-M3 Backflow Preventer Brass Dual Check Valve with Intermediate Atmospheric Vent,1/2 Inch,Female Union Inlet and Outlet,190T012,Replacement for Watts
ItemPackageDimensions_Height : 12.7 centimeters
ItemPackageDimensions_Length : 5.4102 centimeters
ItemPackageDimensions_Width : 7.5946 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : industrial-check-valves
Manufacturer : Pontuss
Material : Brass
MaximumOperatingPressure : 175 pounds_per_square_inch
ModelName : 1/2" F9D-M3
ModelNumber : 190T012
NumberOfItems : 1
NumberOfPieces : 6
NumberOfPorts : 2
PartNumber : 1/2" F9D-M3
ProductDescription :

Series F9D-M3 is specially made for smaller supply lines and ideally suited for laboratory equipment, processing tanks, sterilizers,dairy equipment and similar applications. It is particularly recom mended for boiler feed lines to prevent backflow when supply pressure falls below system pressure.Series 9D is suitable for use on hot or cold water and can be used under continuous pressure. It features a primary check valve utilizing a rubber disc seating against a mating rubber part to ensure tight closing. A secondary check valve utilizes a rubber disc-to-metal seating. In the event of fouling of the down stream check valve, leakage would be vented to atmosphere through the vent port thereby safeguarding the potable water system. Construction is brass body with stainless steel working parts, integral strainer and durable rubber discs. Female union inlet and outlet connections. Sizes 1⁄2" .Drain is 1⁄2" thread connection.

ProductSiteLaunchDate : 2024-08-23T07:08:12.204Z
Size : 1/8" MNPT x 1/8" FNPT
SkipOffer : 1
SpecificationMet : ASME, ASTM, UL
Style : Split Check Valve
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 10
UnspscCode : 40141600
ValveType : check valve