Cart 2 india

Specification
Brand : AF
BulletPoint1 : Swing check valve to prevent backflow by ensuring that fluid moves in only one direction.
BulletPoint2 : Made of brass material and conform to ANSI B16.34
BulletPoint3 : Maximum working pressure of 300 PSI and temperature rating of -10°C to 100°C.
BulletPoint4 : Two NPT threaded ends.
BulletPoint5 : Our Service : If you have any questions about the 905-051 765 check valve assembly , either before or after sale, please feel free to contact us, we will provide you with a professional solution.
Color : Gold
ExteriorFinish : Metal
ExternallyAssignedProductIdentifier : 8886481776571
IncludedComponents : Spring, Retainer & Holder Yellow
ItemDisplayDimensions_Length : 3.5 inches
ItemDisplayWeight : 0.98 pounds
ItemName : AF Hydro Brass Swing Check Valve Low Pressure Valve, 2" NPT, up to 300 PSI, Non-Return Valve with Metal Seat for General Water, Oil, and Gas
ItemPackageDimensions_Height : 2.4 inches
ItemPackageDimensions_Length : 2.7 inches
ItemPackageDimensions_Width : 3.8 inches
ItemPackageQuantity : 1
ItemTypeKeyword : industrial-check-valves
Manufacturer : AF
Material : Brass
MaximumOperatingPressure : 200 pounds_per_square_inch
ModelName : Febco 765 Assembly Repair Kit
ModelNumber : VL-C-B-SC-N-32-300
NumberOfItems : 1
PartNumber : VL-C-B-SC-N-32-300
ProductDescription : The swing check valve, also known as a one-way valve or non-return valve, allows fluid to flow in one direction only, preventing backflow. It is commonly used in heating, ventilating, and air conditioning (HVAC) systems, where coolant is pumped to high levels, making it crucial to ensure that the fluid only moves in the intended direction. The valve has an inlet and an outlet port, and fluid entering through the inlet pushes a disc to swing upwards, allowing the fluid to flow through. When the fluid stops or tries to flow backward, the disc is pushed back, preventing the flow. The valve is easy to maintain, as the bolts, hinge, and disc in the valve body can be removed for repair. The valve's design provides easy access for repair jobs, as the disc can move both horizontally and vertically to fully close, requiring only a small force to operate the valve. The valve's seat is installed at a 20° angle to provide extra strength in preventing backflow, ensuring a full and unobstructed fluid flow. To install the swing check valve, the pipes should be clean, aligned with the valve's ports, and all sections of the pipe should match to avoid rupture. Any unsupported piping sections should be temporarily fixed to prevent unwanted strain on the valve. The connection should be sealed with thread sealant and tested for tightness to ensure optimal performance. This swing check valve is made of brass material according to ANSI B16.34. The maximum working pressure is up to 300 PSI, and there are two NPT threaded ends. In terms of working temperature, it has a range of -10°C to 100°C.
ProductSiteLaunchDate : 2023-05-12T08:53:11.025Z
Size : 2" NPT
SpecificationMet : ansi b16.34
Style : Outdoor Installation
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 40141600
ValveType : Swing Check Valve