Cart 2 india

Specification
Brand : AF
BulletPoint : Fit 3/8" OD Tube 304 Stainless Steel One Way Check Valve Non-return in Line Compression Valve
BulletPoint1 : Swing check valve to prevent backflow by ensuring that fluid moves in only one direction.
BulletPoint2 : Made of stainless steel 316 / CF8M material that provides higher resistance against corrosion and rust.
BulletPoint3 : Maximum working pressure of 200 PSI and temperature rating of -29°C to 150°C.
BulletPoint4 : Two NPT threaded ends.
BulletPoint5 : NOTE: Please check the size before purchasing.
Color : Brass Tone
ExteriorFinish : Metal,Stainless Steel
ExteriorFinish1 : Stainless Steel
ExteriorFinish2 : Brass
ExteriorFinish3 : Brass
ExternallyAssignedProductIdentifier : 8886481776830
ExternallyAssignedProductIdentifier1 : 098268592634
ExternallyAssignedProductIdentifier2 : 0098268592634
FitType : Universal Fit
IncludedComponents : 9D-M2 Backflow Preventer 3/4 Inch Dual Check Valve
ItemName : AF Hydro Stainless Steel SS316 Swing Check Valve Low Pressure Valve, 1/4" NPT, up to 200 PSI, Non-Return Valve with Metal Seat for General Water, Oil, and Gas
ItemPackageDimensions_Height : 24.7 centimeters
ItemPackageDimensions_Length : 4.1 centimeters
ItemPackageDimensions_Width : 14.6 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : industrial-check-valves
Manufacturer : AF
Material : Stainless Steel
Material1 : Stainless Steel
Material2 : Brass
Material3 : Brass
MaximumOperatingPressure : 200 pounds_per_square_inch
ModelName : 9D-M2 Backflow Preventer 3/4 Inch Dual Check Valve
ModelNumber : VL-C-S-SC-N-04-200
NumberOfItems : 1
NumberOfPieces : 1
PackageLevel : unit
PartNumber : VL-C-S-SC-N-04-200
ProductDescription : The swing check valve, also known as a one-way valve or non-return valve, allows fluid to flow in one direction only, preventing backflow. It is commonly used in heating, ventilating, and air conditioning (HVAC) systems, where coolant is pumped to high levels, making it crucial to ensure that the fluid only moves in the intended direction. The valve has an inlet and an outlet port, and fluid entering through the inlet pushes a disc to swing upwards, allowing the fluid to flow through. When the fluid stops or tries to flow backward, the disc is pushed back, preventing the flow. The valve is easy to maintain, as the bolts, hinge, and disc in the valve body can be removed for repair. The valve's design provides easy access for repair jobs, as the disc can move both horizontally and vertically to fully close, requiring only a small force to operate the valve. The valve's seat is installed at a 20° angle to provide extra strength in preventing backflow, ensuring a full and unobstructed fluid flow. To install the swing check valve, the pipes should be clean, aligned with the valve's ports, and all sections of the pipe should match to avoid rupture. Any unsupported piping sections should be temporarily fixed to prevent unwanted strain on the valve. The connection should be sealed with thread sealant and tested for tightness to ensure optimal performance. This swing check valve is made of stainless steel 316/ CF8M material that provides higher resistance against corrosion and rust. The maximum working pressure is up to 200 PSI, and there are two NPT threaded ends. In terms of working temperature, it has a range of -29°C to 150°C.
ProductSiteLaunchDate : 2023-05-12T08:18:31.018Z
Size : 1/4" NPT
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 40141600
ValveType : Swing Check Valve