Cart 2 india

Specification
Brand : HARFINGTON
BulletPoint1 : Size - Cutting diameter: 10.8mm / 0.425"; accuracy class: H7; cutting flute length: 18mm / 0.71"; shank diameter: 11mm / 0.43"; 114mm / 4.49"; cutting direction: right hand
BulletPoint2 : Material - C1/K30 tungsten carbide is a tungsten-cobalt carbide with an average cobalt content of 6%, high hardness, good toughness, wear resistance, high heat resistance, and anti-sticking. Carbide can run at higher speed than high-speed steel.
BulletPoint3 : Features - Straight flute reamers allow chips to collect in the flutes when cutting. Well suited for most applications in shallow cuts. Suitable for use in through holes or holes without interruption, such as keyways.
BulletPoint4 : Applications - Widely used for processing, and bore machining. Designed for accurate reaming in stainless steel, aluminum, cast iron, copper, alloy steel, die steel, tool steel, plastic, wood, etc.. Great for light cut, repair work, or simply for enlarging holes.
BulletPoint5 : Notes - Use on all types of equipment including screw machines, turret lathes, drill presses and machining centers. Always keep reamers clean, and used with machine oil for long service use. Should held in a good-quality toolholder.
BulletPoint6 : Made in the USA
Color : Gray
DrillType : basic_drill
ExternallyAssignedProductIdentifier1 : 697334258070
ExternallyAssignedProductIdentifier2 : 0697334258070
ExternallyAssignedProductIdentifier3 : 00697334258070
FinishType : Uncoated
GpsrSafetyAttestation : 1
ItemName : HARFINGTON Chucking Reamer 10.8mm H7 C1/K30 Carbide Tip Precision Straight Flutes Round Shank Lathe Machine Milling Cutter
ItemPackageDimensions_Height : 13.8 centimeters
ItemPackageDimensions_Length : 1.6 centimeters
ItemPackageDimensions_Width : 10.1 centimeters
ItemPackageQuantity : 1
ItemShape : Straight flute straight shank
ItemTypeKeyword : chucking-reamers
Manufacturer : HARFINGTON
Material : C1/K30 Tungsten Carbide, High Speed Steel
Material1 : solid carbide
Material2 : tungsten steel
ModelName : Chucking Reamer
ModelNumber : hta230104hh0092
NationalStockNumber : 5365-99-751-2651
NumberOfItems : 1
PackageLevel : unit
PartNumber : hta230104hh0092
PowerSourceType : Battery Powered
ProductDescription : C1/K30 Tungsten Carbide is a tungsten-cobalt carbide with an average cobalt content of 6%. Carbide tip has high hardness, good toughness, wear resistance, high heat resistance, and anti-sticking. With good milling and cutting performance, carbide can run at higher speed than high-speed steel.
Straight flute reamers allow chips to collect in the flutes when cutting. Well suited for most applications in shallow cuts. Suitable for use in through holes or holes without interruption, such as keyways. Designed with the base substrate without any coatings, good for general purpose applications.
Widely used for processing, and bore machining. Designed for accurate reaming in stainless steel, aluminum, cast iron, copper, alloy steel, die steel, tool steel, plastic, wood, etc.. Great for light cut, repair work, or simply for enlarging holes.
Use on all types of equipment including screw machines, turret lathes, drill presses and machining centers. Always keep reamers clean, and used with machine oil for long service use.
Notice: Should held in a good-quality toolholder in order to prevent the reamer from slipping in high torque applications. Can be used with a wide variety of tool holding systems.

ProductSiteLaunchDate : 2023-03-05T14:44:36.065Z
Size : 10.8mm
SpecificUsesForProduct : Machine
StreetDate : 2017-05-15T00:00:01Z
Style : Straight Flutes
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 27110000