Cart 2 india

Specification
Brand : HARFINGTON
BulletPoint1 : Size - Cutting diameter: 7.6mm / 0.299"; accuracy class: H7; cutting flute length: 15mm / 0.59"; round shank diameter: 7.4mm / 0.291"; total length: 100mm / 3.94"; cutting direction: right hand
BulletPoint2 : Material - Carbide tip has high hardness, good toughness, wear resistance, high heat resistance, and anti-sticking. With good milling and cutting performance, carbide can run at higher speed than high-speed steel. Designed with the base substrate without any coatings.
BulletPoint3 : Features - Straight flute reamers allow chips to collect in the flutes when cutting. Well suited for most applications in shallow cuts. Suitable for use in through holes or holes without interruption, such as keyways.
BulletPoint4 : Applications - Widely used for processing, and bore machining. Designed for accurate reaming in stainless steel, aluminum, cast iron, copper, alloy steel, die steel, tool steel, plastic, wood, etc.. Great for light cut, repair work, or simply for enlarging holes.
BulletPoint5 : Notes - Use on all types of equipment including screw machines, turret lathes, drill presses and machining centers. Always keep reamers clean, and used with machine oil for long service use. Should held in a good-quality toolholder.
Color : Gray
ExternallyAssignedProductIdentifier1 : 0887853433878
ExternallyAssignedProductIdentifier2 : 887853433878
FinishType : Uncoated
GpsrSafetyAttestation : 1
ItemName : HARFINGTON Chucking Reamer 7.6mm H7 Carbide Tip Straight Flutes Round Shank Lathe Machine Milling Cutter
ItemPackageDimensions_Height : 8.9 centimeters
ItemPackageDimensions_Length : 1.5 centimeters
ItemPackageDimensions_Width : 6.1 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : chucking-reamers
Manufacturer : HARFINGTON
Material : Carbide, High Speed Steel
ModelNumber : hta221017hh0105
PartNumber : hta221017hh0105
ProductDescription : Carbide tip has high hardness, good toughness, wear resistance, high heat resistance, and anti-sticking. With good milling and cutting performance, carbide can run at higher speed than high-speed steel. Designed with the base substrate without any coatings, good for general purpose applications.
Straight flute reamers allow chips to collect in the flutes when cutting. Well suited for most applications in shallow cuts. Suitable for use in through holes or holes without interruption, such as keyways.
Widely used for processing, and bore machining. Designed for accurate reaming in stainless steel, aluminum, cast iron, copper, alloy steel, die steel, tool steel, plastic, wood, etc.. Great for light cut, repair work, or simply for enlarging holes.
Use on all types of equipment including screw machines, turret lathes, drill presses and machining centers. Always keep reamers clean, and used with machine oil for long service use.
Notice: Should held in a good-quality toolholder in order to prevent the reamer from slipping in high torque applications. Can be used with a wide variety of tool holding systems.

ProductSiteLaunchDate : 2022-11-19T03:44:59.090Z
Size : 7.6mm
SpecificUsesForProduct : Machine
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SupplierDeclaredDgHzRegulation3 : not_applicable
SupplierDeclaredDgHzRegulation4 : not_applicable
SupplierDeclaredDgHzRegulation5 : not_applicable
UnspscCode : 27110000