Cart 2 india

Specification
Brand : Garosa
BulletPoint1 : Straight shank drill bits, can obtain greater drilling capacity under the same torsion.
BulletPoint2 : Micro fixed shank drill bit, uses cemented carbide material, wearresistant and .
BulletPoint3 : With 10 drill bits of different specifications to meet the basic needs of use.
BulletPoint4 : Mainly used in circuit boards, suitable for most working environments.
BulletPoint5 : Not easy to corrode, but because the bit is too thin and easy to break, please be careful when using it.
Color : Gray
CuttingAngleString : 45.0 degrees
ExternallyAssignedProductIdentifier : 4014586603537
ExternallyAssignedProductIdentifier1 : 4014586629100
ExternallyAssignedProductIdentifier2 : 04014586629100
FinishType : Finished
IncludedComponents : One cutter and pin
ItemDisplayDimensions_Height : 4 inches
ItemDisplayDimensions_Length : 2 inches
ItemDisplayDimensions_Width : 2 inches
ItemName : Circuit Board Bit, 10Pcs Micro Drill Bit Set Cemented Carbide 1.2-2.1mm Straight Shank Drill Printed Circuit, Hex Shank Drill Bits
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 9 centimeters
ItemPackageDimensions_Width : 5 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : circuit-board-drill-bits
Manufacturer : Garosa
Material : High Speed Steel
ModelName : Ftvoguedtpb5gcxma
ModelNumber : Garosaa8q6th49co
NumberOfFlutes : 4
NumberOfItems : 1
PartNumber : Garosaa8q6th49co
ProductDescription : Specification:
Item Type: Drill Bit
Material: Cemented Carbide
Model: Straight Shank Drill
Cutting Diameter: Approx. 0.2mm / 0.008in
Shank Diameter: Approx. 3.175mm / 0.13in
Length of Chip Pocket: Approx. 5mm / 0.20in
Useful Length: Approx. 5mm / 0.20in
Total Length: Approx. 38mm / 1.50in
Outer Angle: 45°
Maximum Cutting Depth: Approx. 5mm / 0.20in
Size: Approx. 1.2mm / 0.047in, 1.3mm / 0.051in, 1.4mm / 0.055in, 1.5mm / 0.059in, 1.6mm / 0.063in, 1.7mm / 0.067in, 1.8mm / 0.071in, 1.9mm / 0.075in, 2mm / 0.079in, 2.1mm / 0.083in

Package List:
10 x Drill Bit



ProductSiteLaunchDate : 2025-02-11T00:00:00.000Z
Size : 1-1/2 inches x 1 inches
SupplierDeclaredDgHzRegulation : not_applicable
SurfaceRecommendation : Alloy Steel
SurfaceRecommendation1 : Metal
SurfaceRecommendation2 : Plastic
UnitCount : 1
UnspscCode : 27112800