SpecificationBrand : PreAsion
BulletPoint1 : Control system: Lasted proprietary software research and development of homemade temperature control technology, matched with high standards PT100 and electronic parts which all are imported, etc.
BulletPoint2 : Protection system: Control system has over-temperature alarm, could set the top and lowest alarm temperature parameters, could cut off the load functions automatic when over temperature.
BulletPoint3 : LED temperature display, up and down double window use clearly red color.Control instruments is simply operating, temperature stability is strong.
BulletPoint4 : Accurate temperature correction function which could up to 0.01℃,the highest temperature fluctuation could up to ±0.02℃ (based on different type).
BulletPoint5 : Circulatory system: Advanced inner circulatory and outer circulatory system, outer circulatory could guide the inner bath constant temperature liquid outflow, and establish the second constant temperature field. Inner circulatory could make the bath inner liquid temperature be more uniform and stability.
ExternallyAssignedProductIdentifier1 : 0840403711079
ExternallyAssignedProductIdentifier2 : 840403711079
ItemName : 220V 10L Thermostatic Oil Water Circulating Heater Bath Heating Circulator Digital high Temperature Control Accuracy 0~300℃
ItemPackageDimensions_Height : 55.88 centimeters
ItemPackageDimensions_Length : 38.1 centimeters
ItemPackageDimensions_Width : 46.99 centimeters
ItemTypeKeyword : science-lab-circulating-baths
Manufacturer : PreAsion
NumberOfItems : 1
PartNumber : L020443FBA
ProductDescription : Enjoy a high level of quality and customization from this heated circulating bath with a programmable controller. With icons on the touch screen for Settings, Safety, Connect, Program, Home, Control, Time and Service, users can readily set the pump speed, temperature display resolution, auto restart, display filter and other variables. Customizable safety features include High/Low limit and High/Low alarm, the temperature above or below which the unit will automatically shut down. You can also enable or disable the Local Lock Out; when enabled a password entry screen will appear if the operator attempts to change the set point or access the Main Menu. Calibration parameters include Priority, which means programs can be run using either a Time- or Temperature-based priority; Loop, which sets the number of times the program will run through the programmed steps; and Soak Temperature, the temperature the bath should be maintained at once the final step has been completed. The USB-A port enable data logging onto a flash drive. The controller may also be directly connected to a laptop or desktop computer via its Ethernet connection (or via a wired or wireless network) to let you control or monitor the bath in real time over the internet. RS-232 and RS-485 communications are also supported. The circulating bath tank is made of stainless steel while the deck is chemical resistant, easy to clean and has holes to accommodate probes 2 to 8 mm in diameter. Bath complies with DIN 12876-1 Class III safety requirements for use with flammable liquids. Advanced PID algorithms increase heat responsiveness and eliminate set point overshoot.
Specifications
Height (in): 16.1
Length (cm): 49.9
Flow Rate Lm (in): 20.1
Length (in): 19.6
Height (cm): 40.9
Heater Wattage Watts: 1100
Pump Pressurembar: 300
Pump Pressure (PSI): 4.3
Power VAC: 120
Temperature C: 200
Power Amps: 10
Reservoir Capacity L: 7
Width (cm): 22.1
Width (in): 8.7
Bath Type: Heated circulating
Display Type: 4.3 (in) Smart Touch touchsceen
Min Temperature C: ambient+10°C
Power Hz: 60
Pump Type: Pressure/suction
Temperature Stability C: ±0.005°C
Universal Guarantee: 3 Years
ProductSiteLaunchDate : 2024-07-08T01:57:00.541Z
Style : lab-circulating-baths
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 41000000
Wattage : 2150 watt_hours