Cart 2 india

Specification
Brand : MeterTo
BulletPoint : Digital LCD Capacitance Meter Inductance table High Precision Tester LC Meter Frequency 1pF-100mF 1uH-100H LC100-A + Test clip
BulletPoint1 : [Accurate Readings] : Measure transistor characteristics, gate threshold voltage, and more with precise.
BulletPoint2 : [Automatic Detection] : Identify npn and pnp transistors, mosfets, diodes, thyristors, and more effortlessly.
BulletPoint3 : [Fast Testing] : Enjoy speedy results in under 2 seconds for most components.
BulletPoint4 : [Convenient Operation] : Utilize one-key functionality for quick testing on the lcd display.
BulletPoint5 : [Energy-saving] : Benefit from low power consumption mode to preserve battery life.
ExternallyAssignedProductIdentifier1 : 0666354107927
ExternallyAssignedProductIdentifier2 : 666354107927
IncludedComponents : No
ItemName : MeterTo ETCR6300D DC Leaker Current Clamp Meter
ItemPackageDimensions_Height : 4 centimeters
ItemPackageDimensions_Length : 11 centimeters
ItemPackageDimensions_Width : 9 centimeters
ItemTypeKeyword : clamp-meters
Manufacturer : MeterTo
MeasurementAccuracy : 0.1mm
ModelName : Hyuduoad1szci5ne
ModelNumber : Hyuduoad1szci5ne
NumberOfItems : 1
PartNumber : ZHLIN_WJS_10005
PowerSourceType : Battery Powered
ProductDescription :

Function: Measurement of DC leakage current, DC current, Car leakage

Power: Zn-Mn dry battery,6F22, 9V DC, continuous use for 60 hours

Test Mode: Clip-on CT, Magnetic modulation

Clamp Size: 25mm×30mm

Range: 0.0mA~6.00A DC

Resolution: 0.1mA DC

Accuracy: ( 23°C±3°C, below 70%RH)0.0mA~300.0mA DC: ±2%rdg±5dgt0.30A~6.00A DC: ±2%rdg±5dgt

DimensionLWH:175mm×70mm×38mm

LCD Dimension: 35mm×21.5mm; display domain:32mm×15mm

Sampling Rate: About 2 times/s

Range Shift: 0.0mA~6.00A DC Automatically

Zero-Adjustment: Yes, calibrate zero before measuring

Polarity Indication: Auto identified and display“—”

Test Position: Tested wire in the jaw center

Line Voltage: 600V DC

USB Interface: Data stored in the memory of the meter via USB upload to PC, or on-line monitoring

Data Memory: 99units,FULL blinks when the memory is full

Peak Hold: Push HOLD without release, the meter will show the peak value during the pushing period

Reading Hold: DH indicating the reading is hold

Out of Range: OL indicating the current is out of range

Auto Power-off: 5 Minutes after power on, it will power off automatically to lower the power consumption

Battery Voltage:Indicating the battery voltage is lower than 7.2V. Then the battery have to be changed

Weight: 120g( including the battery)

Working Current: 20mA

Limit Temperature Error: -10°C~0°C and 40°C~50°C,within 2%rdg

Temperature and HumidityWorking : -10°C~50°C,below 80%rhStorage : -10°C~60°C,below80%rh

Insulating Strength: AC3700V/rms(between the alloy of the clamp and the housing)

Applicable Safety Rules: IEC1010-1, IEC1010-2-032, Pollution degree 2, CAT III (600V)
ProductSiteLaunchDate : 2018-02-22T08:00:00.000Z
Style : Digital
UnspscCode : 41113600