Cart 2 india

Specification
Brand : REFSAN
BulletPoint1 : The shrinkage rates of the casting slip to be poured in may vary depending on whether it is ceramic or porcelain.
BulletPoint2 : It is suitable for casting ceramic or porcelain clay.
BulletPoint3 : The lifetime of the product is about 100 castings. It may vary depending on usage.
BulletPoint4 : Depending on the weather conditions, 2-4 castings can be made per day.
BulletPoint5 : The slip should be poured into the mold slowly and filled up to the rim of the mold.
BulletPoint6 : The casting slip to be put in should be prepared a day before in advance and sodium silicate (glass water) should be used during the preparation stage.
BulletPoint7 : The casting slip should be mixed thoroughly with the help of an electric mixer if possible, or a wooden spoon.
Color : White
ExternallyAssignedProductIdentifier : 8681910654792
GpsrSafetyAttestation : 1
ItemName : Bowl Plaster Mold - 15cm
ItemPackageDimensions_Height : 9 centimeters
ItemPackageDimensions_Length : 18 centimeters
ItemPackageDimensions_Width : 15 centimeters
ItemShape : Square
ItemTypeKeyword : clay-molds
Manufacturer : Refsan
Material : Ceramic
ModelName : Bowl Plaster Mold - 15 cm
ModelNumber : R20783
NumberOfItems : 1
NumberOfPieces : 1
PartNumber : R20783
ProductDescription : 15 cm Bowl 30cm Width 13.5cm Height Diameters are the diameter of the product to be released Product information: The shrinkage rates of the casting slip to be poured in may vary depending on whether it is ceramic or porcelain. It is suitable for casting ceramic or porcelain clay. If the edges of the mold are broken or damaged, it does not prevent getting a smooth product from it. The important part is that the inside of the mold is smooth. The plaster mold should be wiped with a damp sponge before casting, and care should be taken to avoid dust and particles. The casting slip should be mixed thoroughly with the help of an electric mixer if possible, or a wooden spoon. The casting slip to be put in should be prepared a day before in advance and sodium silicate (glass water) should be used during the preparation stage. The slip should be poured into the mold slowly and filled up to the rim of the mold. Depending on the weather conditions, 2-4 castings can be made per day. The lifetime of the product is about 100 castings. It may vary depending on usage.
ProductSiteLaunchDate : 2024-06-26T11:41:23.691Z
Size : As shown in the picture
Style : Garden
SupplierDeclaredDgHzRegulation : unknown
TargetAudienceKeyword : unisex-adult
UnspscCode : 52152000
WarrantyDescription : 90 day free replacement and repair service.