Cart 2 india

Specification
Brand : GODIYMODULES
BulletPoint1 : SSi5351A I2C Generator Clock Breakout Board 8KHz to 160MHz for Arduino
BulletPoint2 : Never hunt around for another crystal again, with the Si5351A clock generator breakout ! This chip has a precision 25MHz crystal reference and internal PLL and dividers so it can generate just about any frequency, from <8KHz up to 150+ MHz.
BulletPoint3 : The Si5351A clock generator is an I2C controller clock generator. It uses the onboard precision clock to drive multiple PLL's and clock dividers using I2C instructions. By setting up the PLL and dividers you can create precise and arbitrary frequencies. There are three independent outputs, and each one can have a different frequency. Outputs are 3Vpp
BulletPoint4 : We put this handy little chip onto it's own breakout board PCB, with a 3.3V LDO regulator so it can be powered from 3-5VDC. We also put level shifting circuitry on the I2C lines so you can use this chip safely with 3V or 5V logic.
BulletPoint5 : for use with the Arduino microcontroller and IDE but is easily ported to your favorite platform with I2C support.
ExternallyAssignedProductIdentifier : 4260474038855
IncludedComponents : 1PCS
ItemName : DC 3V-5V Si5351A Si5351 I2C Clock Generator Breakout Board Module Signal Generator Clock 8KHz-160MHz for Arduino
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 10 centimeters
ItemPackageDimensions_Width : 5 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : clock-generators
Manufacturer : GODIYMODULES
ModelName : 15346496464964
ModelNumber : 15346496464964
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : Si5351A-001
ProductDescription :

Never hunt around for another crystal again, with the Si5351A clock generator breakout ! This chip has a precision 25MHz crystal reference and internal PLL and dividers so it can generate just about any frequency, from <8KHz up to 150+ MHz.

The Si5351A clock generator is an I2C controller clock generator. It uses the onboard precision clock to drive multiple PLL's and clock dividers using I2C instructions. By setting up the PLL and dividers you can create precise and arbitrary frequencies. There are three independent outputs, and each one can have a different frequency. Outputs are 3Vpp.

We put this handy little chip onto it's own breakout board PCB, with a 3.3V LDO regulator so it can be powered from 3-5VDC. We also put level shifting circuitry on the I2C lines so you can use this chip safely with 3V or 5V logic.

 for use with the Arduino microcontroller and IDE but is easily ported to your favorite platform with I2C support

 

Package:

1 x  SSi5351A I2C Generator Clock Breakout Board 8KHz to 160MHz for Arduino

ProductSiteLaunchDate : 2025-01-06T07:28:35.910Z
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 39120000