Cart 2 india

Specification
Brand : ZAMABO
BulletPoint1 : 【Flange Size】Made Of Zinc Alloy Material, Will Not Rust Easily. Flange Length * Width Size: 84.9*45MM（3.34''*1.77''）. Recommended Tube Size:15.5MM×30.5MM(0.61''×1.2''). Please Note That The Thickness Of The Flat Tube Should Not Be Larger Than The Size Of The Flange Interior.
BulletPoint2 : 【Good Load-bearing Capacity】Two Flange Rod Holders Can Withstand A Weight Of 20kg. Flange Bracket With Internal Thread, When You Install And Use, Will Not Easily Fall Off.
BulletPoint3 : 【Adjustable Height Design】 Flange Rod Holder Can Be Raised From 85-112MM (3.34''-4.41''), The Height Can Be Adjusted By Rotating The Flange , And Different Heights Can Adapt To Different Scenes.
BulletPoint4 : 【Wide Range Of Application】Because Rod End Support Can't Pass Through The Wholes Hanger Tube, Half Close Design Flange Holder, Suitable For Both Ends Of Closets/ceilings/walls, Etc.
BulletPoint5 : 【How To Install】Align The Position Of The Flange To Be Installed At Both Ends. （You Need To Adjust The Height Of The Flanges You Want Before Installing The Screws）After Marking, Install The Flange On One Side First, Then Put The Pipe Into The Flange, And Finally Install The Other Side.
Color : Chrome
IncludedComponents : Flange Holder and Screws
ItemName : 2 Pack Oval Closet Rod Holder Zinc Alloy Adjustable Height Flange Rod Holder Wardrobe Clothes Hanger Rod End Support Bracket (1 Pairs)
ItemTypeKeyword : closet-shelf-and-rod-brackets
Manufacturer : ZAMABO
Material : Zinc
MaximumWeightRecommendation : 55 grams
ModelName : Adjustable Oval Tube Holder
ModelNumber : ZA004
MountingType : Wall Mounted
NumberOfItems : 2
ProductDescription :

Color: Chrome.

Material: Zinc Alloy.

Adjustable Flange Height: 85-112MM (3.34''- 4.41'')

Recommended Tube Size:15.5MM×30.5MM(0.61''×1.2'').

One Package Includes: 2 Pcs Closet Rods Flange And Mounting Screw.

Size: [L*W] 84.9*45MM（3.34''*1.77''）,Rod Inner: [L*W] 31.75*15.9MM（1.25''*0.625''）.

Widely Applied In Closet, Wardrobe, Bathroom, Shower Room, Balcony, Clothes Shop And So On.

Tips：When You Install The Flange.You Need To Align The Two Ends Of The Flange, Try To Make The Two Flanges On The Same Level, Otherwise It Will Be Unstable.

If You Have Any Questions About Our Products, You Can Contact Us At Any Time, We Will Sincerely Answer For You.

ProductSiteLaunchDate : 2024-10-16T09:18:53.484Z
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 2
UnspscCode : 31162500