Cart 2 india

Specification
Brand : HD Switch
BulletPoint1 : Please check your clutch for the correct replacement. The ZTrak series used two very differnt clutches. The first was the Warner 5218-91 (this listing). They later switched to TCA15800 which is a very different clutch. This Listing does NOT replace the TCA15800.
BulletPoint2 : BIGBearing: The Pulley Bearing Takes a lot of abuse and is often the first thing to fail. We use a Larger Pulley Bearing for a much longer life. We designed our Billet Pulley with a snapring making the bearing replaceable.
BulletPoint3 : Tough Billet Pulleys: Billet Pulleys Reduce Belt Wear and Maintain Perfect Blade Speed. Our Billet Pulley Design uses a Snap Ring and Allows for Bearing Replacement.
BulletPoint4 : High Torque Coil: 210ftlbs of Torque. Higher Torque Means this Clutch holds Strong Even in the Toughest Cuts.
BulletPoint5 : Premium C3 Bearings: HD Designed and Spec’d these bearings with C3 Clearances, Premium High Temperature Grease and on Most Models a Larger Tougher Bearing. Cool Coil Technology: We use a Proprietary Composite Material Instead of Plastic. This Allows the heat to Escape the Clutch Faster. Less Heat = Longer Life
BulletPoint6 : Compatibl models with 42" Decks.
Color : /
ExternallyAssignedProductIdentifier : 7847622982726
ExternallyAssignedProductIdentifier1 : 0717020012226
ExternallyAssignedProductIdentifier2 : 717020012226
ItemName : HiTorque 210ftlb BIGBearing Billet Pulley Upgrade Blade Clutch TCA12522 & 20A PTO Switch LVA21437 fits John Deere M653 M655 M665 737 757 777 797 Mowers with Warner 5218-91 & 5218-303 5218-307 ONLY
ItemPackageDimensions_Height : 28 centimeters
ItemPackageDimensions_Length : 16.1 centimeters
ItemPackageDimensions_Width : 24.1 centimeters
ItemShape : Round
ItemTypeKeyword : lawn-mower-electric-clutches
Manufacturer : HD Switch
ModelName : Deck Clutch Cable
ModelNumber : Ztrak
NumberOfBoxes : 1
OperationMode : Manual
PartNumber : TCA12522
PowerSourceType : gasoline
ProductDescription : HD Clutches are designed by HD Clutch and Assembled in the USA. We use Machined Billet Pulleys for several reasons. The first, it is easy to damage formed pulley and damage (even a small stone nick) damages the belt with every rotation. With our Billet Pulley design we include a snap ring so the bearing is replaceable, making this clutch rebuildable. Lastly and most importantly, a Billet Pulley does not spread during tough loads and maintains a Constant blade speed. Allow us to explain: When a pulley spreads the belt sinks in slightly and this acts like a smaller pulley and slows the belt speed down. It’s not much but it also wears the belt more. Higher Torque: We add a few more windings to our coils to provide the maximum gripping strength to prevent damaging micro-slipping. Clutches all run very hot; we use a composite material instead of plastic to allow the heat to dissipate much faster. This makes the HD Clutch run much cooler; extending the bearing and clutch life. HD Clutch wrote the Bearing specifications to include Premium C3 Rated Bearings and high temperature rated synthetic grease to combat heat. Less Heat = Extended Life.
Style : Modern
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnspscCode : 26111500