Cart 2 india

Specification
Brand : FASTENMASTER
BulletPoint1 : Plugs compatible with Trex Transcend decking and are made from Trex deck boards, ensuring plugs match the color and texture
BulletPoint2 : Collated Cortex plugs minimizes handling and saves valuable time on the jobsite
BulletPoint3 : Conceals fasteners for the entire deck, including first and last boards, breaker boards, perimeter and stairs
BulletPoint4 : Strong connection between deck boards and joists
BulletPoint5 : Includes (224) screws, (300) plugs, and (2) setting tools
Color : Trex Transcend Spiced Rum
CompatibleGrooveDiameter : 6 millimeters
DriveSystem : Torx
ExteriorFinish : Alloy Steel
ExternallyAssignedProductIdentifier1 : 0608309441168
ExternallyAssignedProductIdentifier2 : 608309441168
ExternallyAssignedProductIdentifier3 : 00772691000996
FinishType : Plastic
GpsrSafetyAttestation : 1
GradeRating : residential
ItemName : Fasten Master Collated Cortex for Trex Transcend Spiced Rum with 2-1/2' Screws for 100 Linear Feet
ItemPackageDimensions_Height : 16.7 centimeters
ItemPackageDimensions_Length : 2.5 centimeters
ItemPackageDimensions_Width : 10.2 centimeters
ItemPackageQuantity : 1
ItemShape : Round
ItemTypeKeyword : collated-screws
Manufacturer : FastenMaster
Material : Acrylic
Material1 : Carbon Steel Screws
Material2 : Trex Deck Board Plugs
MeasurementSystem : Imperial
MeasurementSystem1 : Imperial
MeasurementSystem2 : Metric
MetalType : Plastic
ModelName : R4 00099
ModelNumber : 772691000996
NumberOfItems : 1
NumberOfPieces : 120
PackageLevel : unit
PartNumber : FMCTXCL-TX1LFTSSR
ProductDescription : FastenMaster Collated Cortex for Trex Decking - 100 Linear Feet is a fast and easy way to conceal fasteners and screw heads when installing Trex Deck Boards and now it is 50% faster. FastenMaster Cortex plugs are now available on a collated strip. This minimizes handling and saves valuable time on the job site. The fastener not only delivers high levels of holding power but conceals fasteners for the entire deck including first and last boards, breaker boards, perimeter and stairs. With the TORX ttap Drive System it is almost impossible to strip-out and the fasteners are easily removed. The stability button keeps the fastener straight through the installation process. The setting tool is industrial grade and enables you to install 350 fasteners on one Cortex setting tool. Cortex is easy-to-use and includes everything needed, including screws, plugs and setting tools. FastenMaster recommends installing with an 18 volt cordless drill. Impact drivers are not recommended on deck boards made from composite material with or without a capstock. Note: Pre-drilling is not required throughout the majority of the project. Pre-drilling is required when fastening within 1/2" of the end of a board and at mitered joints. Use a 3/16" drill bit for pre-drilled pilot holes.
ProductSiteLaunchDate : 2024-04-25T07:27:28.282Z
SafetyDataSheetUrl : https://ace.infotrac.net/getmsds.aspx?SKU=2029795
Size : 2.5 inches
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 31161500