Cart 2 india

Specification
Brand : LittleMachineShop.com
BulletPoint1 : ER-32 to JT33 collet chuck
BulletPoint10 : Collet Nut Diameter: 1.65
BulletPoint2 : Compatible with standard Jacobs taper spindles
BulletPoint3 : Maximum RPM is 8,000
BulletPoint4 : T.I.R. is less than or equal to 0.0002"
BulletPoint5 : Ground & hardened for accuracy and precision
BulletPoint6 : Min. Capacity: 1/16
BulletPoint7 : TIR (Inch): 0.0001
BulletPoint8 : Drawbar Thread Size: M12 x 1.75
BulletPoint9 : Stop Screw Thread Size: M18 x 1.5
ExternallyAssignedProductIdentifier1 : 0736530766238
ExternallyAssignedProductIdentifier2 : 736530766238
IncludedComponents : Collet Chuck
ItemName : Collet Chuck, ER-32, JT33 (5995)
ItemPackageDimensions_Height : 7.5 inches
ItemPackageDimensions_Length : 2.79 inches
ItemPackageDimensions_Width : 2.79 inches
ItemPackageQuantity : 1
ItemShape : Round
ItemTypeKeyword : workholding-collets
Manufacturer : LittleMachineShop.com
ModelName : Collet Chuck, ER-32, JT33 (5995)
ModelNumber : LMS5995
NumberOfItems : 1
PartNumber : 5995
Pattern : 1/8"
PowerSourceType : Hand Powered
ProductDescription : JT33 to ER-32 collet chuck, milling chuck holder.
This collet chuck is hardened and precision ground and has a T.I.R. is less than or equal to 0.0002" (0.005 mm). The chuck will hold all ER-32 collets.
ER-32 collets have a range of 1/16" to 13/16" (1.0 mm to 21.0 mm).
Note: Collet must be assembled into a collet chuck nut before inserting into the collet chuck.
ProductSiteLaunchDate : 2024-04-17T19:48:39.401Z
Size : 1/8 in
Style : Tap Collets 1/8"
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 27111700