Cart 2 india

Specification
AutoPartPosition : outside
Brand : HEROFFIX
BulletPoint1 : Adaptable: Stick Size: 7mm x 200mm /0.28" x 7.87"(Diameter*Length); Softening Point: 100℃
BulletPoint2 : Trustworthy: Design for repairing car dent, has very strong adhension and low melting point, if you want to repair car dent, that is your choice.
BulletPoint3 : Detail: Yellow glue stick is ultra strong in stickness for the harder parts.
BulletPoint4 : Item: Easy to clean,you should use the wet cloth and alcohol to clean the glue as soon as possible after repairing the dent.
BulletPoint5 : Tips: Glue stick is 7mm x 200mm, Please sure if it fits for your glue gun before purchasing.
Color : Yellow
FitType : Universal
ItemName : HEROFFIX 12 Pcs 7mm x 200mm Hot Glue Sticks Auto Body Paintless Dent Removal Repair Yellow for Car Replace Parts
ItemPackageDimensions_Height : 0.59 inches
ItemPackageDimensions_Length : 12.2 inches
ItemPackageDimensions_Width : 4.33 inches
ItemPackageQuantity : 1
ItemTypeKeyword : automotive-collision-repair-sets
Manufacturer : HEROFFIX
Material : Resin
PartNumber : 007106herof241010
ProductDescription : Specifications:
Stick size: 7mm x 200mm /0.28" x 7.87"(Diameter*Length)
Softening Point: 100°C
Total Length:200mm/7.87"

Description:

Advanced, practical ,stability and strong viscosity design of this glue adhesive stick.
This practical glue stick use in high temperature glue gun(not included).
Great for car paintless dent repair and more.

How to Use?
1.Clean the dent with a clean wet cloth;
2.Mount the glue stick into the glue gun,pull the trigger to let the glue stick enter into the glue gun, connect the power source and preheat for 5 minutes;
3.Use a proper drawing gasket. Large dent requires a large drawing gasket. (Note: The larger the drawing gasket is, the larger the drawing force is);
4. Pull the trigger and apply the drawing gasket with extruded glue (The 4 holes of gasket should be applied with hot melt glue);
5. Fast place the drawing gasket with hot melt glue at the center of dent, press lightly until the glue cures and adheres (Let the glue cool for about 8 minutes. The cooling time should be less than 10 minutes and should be shorter slightly in winter);
6. Align the T-shaped repairer and press the drawing gasket with hot melt glue, pull the sliding rod backwards to pull up the dent;
7. Check with a Line board. If dent still exists, knock it slightly with a flattening hammer or pen;
8. Clean the repaired place with a clean wet cloth.

Package Included:
12 x Yellow Hot Melt Glue Sticks


ProductSiteLaunchDate : 2024-08-02T08:00:37.118Z
Size : 7mm
SupplierDeclaredDgHzRegulation : not_applicable
TerminalType : Button
UnspscCode : 31201600